User manual SAMSUNG SV-671B

[. . . ] Video Cassette Recorder SV-675B SV-671I SV-671B SV-271I SV-275B SV-271B Instruction Manual www. samsungvcr. com Safety Precautions About this manual Contents CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER TO QUALIFIED SERVICE PERSONNEL. Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. [. . . ] Refer to page 19 if you wish to cancel a preset recording. VIDEOPLUS CODE --------- The numbers next to each TV programme listing are VIDEOPLUS+ code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the VIDEOPLUS+ code for the programme you wish to record. Extend the recording time x x Select the recording speed CODE:0-9 CORRECT: END:MENU TMVIDEOPLUS+ is a trademark of Gemstar Development Corporation. The VIDEOPLUS+ system is manufactured under licence from Gemstar Development Corporation. x x 4 Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. If you wish to correct the VIDEOPLUS+ code that you are entering: x Press the button until the digit to be corrected is cleared x Enter the correct digit Select the PDC recording x x 5 Press the MENU button. Result: The information concerning the programme is displayed. ENG-16 ENG-17 Using the Timer Programming Feature The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. Checking a Preset Recording Playing a Cassette 4 Press to select the recording day. 5 Select the required day by pressing the buttons. or You can check your preset recordings: x When you have finished presetting the VCR x If you have forgotten which programmes will be recorded This function allows you to play back any pre-recorded cassette. Before presetting a recording, check that the date and time are correct. 6 Press to select the recording start time. 7 Select the required hour value by pressing the or buttons. 1 Switch on both the television and your VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ll. Otherwise, the cassette is played automatically. When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). 1 - Insert the cassette. Press the TIMER button. Press the or buttons to select the STANDARD option and then press the button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed. 5(SV-675B/SV-275B) ** TIMER METHOD ** STANDARD VIDEOPLUS 1 - Insert the cassette. Press the TIMER button. or buttons to select the Press the STANDARD option and then press the button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed. 8 Press to select the minutes. 9 Select the required minute value by pressing the or buttons. 3 To. . . Stop the playback Eject the cassette Then press. . . (EJECT). 10 Press to select the recording end time. 11 Select the required recording end time by pressing the or buttons, following the same procedure as when selecting the recording start time. 2 Press the programme. or buttons to select the required 12 Press to select the recording speed. [. . . ] If the problem still exists repeat steps 1 to 5 moving several more channels away from the original setting. 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced Better than 43 dB (SP) More than 240 lines 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced Better than 43 dB (SP) More than 240 lines Video Head Cleaning AUDIO Input Output Wow and flutter (WTD) Signal-to-noise ratio Frequency response -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 0. 4% max (SP) 68 dB min (IHF A filter) 20Hz - 20kHz -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 0. 4% max (SP) 42 dB min (IHF A filter) 100Hz - 8kHz If when tuning in your TV to the VCR test pattern your TV does not find the test pattern or the pattern when found suffers from interference, it may be due to the VCR output channel clashing with the normal TV transmissions in your area. To prevent this you will need to change the VCR output channel in the following way Power requirement Power consumption Operation temperature Operation humidity Weight Dimensions (WxHxD) 220-240V~, 50 Hz Approx. 12 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 84 x 240 mm 220-240V~, 50 Hz Approx. 10 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 84 x 240 mm If you are unable to solve the problem after reading the above instructions, note: x The model and serial number on the rear of your VCR x The warranty information x A clear description of the problem Then contact your nearest SAMSUNG after-sales service. ENG-29 ENG-28 SAMSUNG ELECTRONICS (UK) LTD AUTHORISED SERVICE CENTERS In the event of warranty service being required, please contact your retailer first. [. . . ]