User manual SAMSUNG SV-730

[. . . ] Stop the playback Eject the cassette (STOP). (EJECT). Selecting the Appropriate System Standard Before recording a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. Aerial Connector Aerial input AV input AV Output AUDIO LINE OUT LINE IN 1 TV RCA Cable (Not supplied) VIDEO x When playing back a cassette, the standard is automatically selected by the VCR. x When you playback an NTSC-recorded tape on this VCR make a setting on the color system according to your TV. [. . . ] B/W Black and White 6 On completion, press MENU twice to exit the menu. 5 Press the or buttons to select G or K. 4 Insert the video cassette in the VCR. Check that the UHF channel 36. VCR starts reading the cassette; if not, press button. 6 On completion, press MENU twice to exit the menu. Then tune your television again. 5 Start a scan on your television or set the television to 6 Fine tune the television until the pictures and sound are obtained clearly. Intelligent Picture Control Intelligent picture control feature allows you to adjust the sharpness of the image automatically according to your own preferences. Setting the VCR Output Channel Your VCR output channel may need to be changed if the pictures suffers from interference or if your TV cannot find the pictures. Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen. 7 If you cannot find the pictures and sound, or there is interference from nearby channels, change the VCR OUTPUT CHANNEL to adjust the frequency. 1 During playback, press the MENU button on the remote control. 2 Press the corresponding or the USER SET option. buttons, to select 6 To adjust the sharpness manually, press the to turn the IPC mode OFF. button 8 When the picture and sound are perfectly clear store this channel at the desired programme position on the television. Result: That programme is now reserved for use with your VCR. 7 Press the 1 Press MENU on the remote control. Result: The programming menu is displayed. 3 Press the 2 Press the corresponding 3 And then press 4 Press the or the INSTALLATION option. buttons, to select button to select this option. or buttons, until the cursor is placed in front of the IPC option. button to select the IPC (intelligent picture control) option. Press the IPC button on the remote control. Result: The PICTURE menu appears on the display. When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. 4 Press the corresponding 5 Press the or buttons until the picture is displayed according to your preferences. To adjust the sharpness manually press the SHARPNESS or button on the front of the VCR. If you do not press a button within ten seconds, the PICTURE menu disappears automatically. button to select this option. Result: The INSTALLATION menu is displayed. 8 On completion, press the MENU button again. or buttons, until the cursor is placed in front of the VCR OUTPUT CH option. pressing the or buttons. 5 Select the required output channel (CH21~CH69) by 6 On completion, press MENU twice to exit the menu. Then tune your television again. 02126A SV-740/HACO-ENG 4/9/04 2:18 PM Page 2 Playing a Sequence Frame by Frame You can: x Stop the cassette at a given frame (image) x Advance one frame at a time No sound is heard when playing back frame by frame. Selecting the Recording Speed You can record a cassette at two different speeds: x SP (Standard Play) x LP (Long Play) In Long Play modes: x Each cassette lasts twice as long x The recording is of a slightly lower quality To record a cassette. . . In standard play mode In long play mode Type E-180 E-240 E-260 E-300 Auto Power Off The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected time. Auto Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. 1 Press MENU on the remote control. Result: The menu is displayed. 2 Press the corresponding or EASY OPERATION option. buttons, to select the 1 Press MENU on the remote control. Result: The programming menu is displayed. 1 Press: 2 Press the corresponding EASY OPERATION option. or buttons, to select the x to start playing the cassette x IIP/S to stop the tape at a given frame x IIP/S to advance frame by frame 2 To return to normal playback, press . Press the SPEED button on the remote control, until. . . LP is displayed. 3 Press the button to select this option. Result: The EASY OPERATION menu is displayed. or buttons, until the cursor is placed in front of the AUTO POWER OFF option. button, until you select the time of Auto Power off interval. [. . . ] or buttons as many times as required, until the correct cassette length is displayed. E180 E 300 E240 E260 3 Press the button to select this option. Recording/playback time Recording from Another VCR ANTENNA IN REW time VIDEO Input Output AUDIO Input Output Frequency response Power requirement Power consumption Operation temperature Operation humidity Weight Dimensions (WxHxD) VCR 1 Turn on the TV. 2 Connect the playback side VCR's A/V cable to the recording side VCR's video and audio in (rear panel). 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced L H ON V IDEO OUT OUT TO TV ATT ON OFF AUDIO OUT TEST OFF IN FROM ANT. 3 Select the recording speed (SP/LP) by pressing the SPEED button. 4 Begin playback on the playback side VCR LINE OUT LINE IN 1 and hold down REC (q) button. TV -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 100Hz - 8KHz 110-240V~50/60 Hz Approx. [. . . ]