User manual SAMSUNG SVDVD1E-XFA INTRODUCTION

[. . . ] 01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 1 DVD-VCR DVD-V5000 (SV-DVD1E) Instruction Manual www. samsungvcr. com 01479A DVD-V5000/XSA-GB1 9/5/56 8:02 AM Page 2 Contents GB Contents (cont. ) GB x FOREWORD s x PLAYING BACK 5 6 6 7 8 8 9 10 10 11 12 12 13 14 15 16 17 17 18 18 19 19 20 21 22 23 24 24 25 26 26 27 28 29 29 s s s s s s s s Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front View of the DVD-VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear View of the DVD-VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infrared Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To select Interval Repeat Play during playback, press the REPEAT button at the desired start point. Result: "INTERVAL REPEAT SETTING" is displayed. Press the REPEAT button one more time at the desired end point. Result: The tape is automatically rewound to the start point. "INTERVAL REPEAT" is displayed. AUTO POWER OFF :OFF REPEAT PLAY :OFF NO. OF INTERVAL REPEAT : 5 E N:SETUP D 36 37 01479A DVD-V5000/XSA-GB4 9/5/56 8:07 AM Page 38 Using the Tape Counter GB Connecting an RCA Audio/Video Input Cable GB The tape counter: x Indicates the elapsed time in the play and record modes (hours, minutes and seconds) x Is reset when a cassette is inserted in the DVD-VCR x Allows you to find the beginning of a sequence easily You can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. Examples: x You wish to copy a video cassette with the help of a second VCR (see page 40). x You wish to play back and/or copy pictures taken with a camcorder (see page 40). 0:00:00 If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 1 2 3 x Make sure that both the television and the VCR are switched off before connecting the cables. Connect one end of the RCA audio/video cable into the VIDEO socket on the Rear of the VCR. Plug the other end of the audio/video cable into the appropriate output connector on the other system (VCR or camcorder). Connect one end of the RCA audio cable into the AUDIO sockets on the Rear of the VCR. 3 1 1 2 2 Insert a cassette in your DVD-VCR. x x To set the tape counter to zero at the beginning of a sequence: Press DISPLAY twice to display the counter Press CLEARwhen you want to set the tape counter to zero 3 3 2 To fast-forward or rewind to the sequence at which the counter was set to zero, simply press or . Result: The DVD-VCR stops automatically when the counter reaches zero. 4 Some DVD-VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the OSD mode; refer to page 18). Press DISPLAY: x Once to display the current function, programme number, recording speed, date, time and counter x Twice to display the counter only x Three times to display the time remaining on the cassette x Four times to clear the display Take care to respect the colour coding of the left and right channels. Plug the other end of the audio cable into the appropriate output connectors on the other system (VCR, camcorder or Hi-Fi sound system). 38 39 01479A DVD-V5000/XSA-GB4 9/5/56 8:07 AM Page 40 Using the Assemble Edit Function GB Audio Dubbing a Pre-recorded Cassette GB This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change. With the Audio Dubbing function, you erase the previously recorded sound and replace it with a new soundtrack from: x A CD, DVD x A microphone connected to a sound system x A cassette player Restriction: Audio dubbing is applicable only to the longitudinal audio track (normal audio). ) 1 2 5 Insert the cassette to be edited in your DVD-VCR. Press the ll button to start playback. 2 3 4 When you reach the position from which you wish to start the new recording, press the ll button. Press the FRAME/STEP ( )button again as often as necessary to advance frame by frame, until the exact recording position is located. 5 While the DVD-VCR is in still mode, hold the REC button ( I down for a while to activate the Assemble Edit function. Result: Record symbol flashes in the display. Select the source from which you wish to record by pressing: x The PROG( or ) buttons for television channels x The TV VIEW button for the LINE input sources Press the ll button to start recording. 1 2 3 4 5 Connect an RCA audio cable to the appropriate output on your sound system (cassette player for example). 2 6 Connect the other end of the RCA audio cable to the audio input connectors (L, R) on the Rear of your DVD-VCR. Insert the pre-recorded cassette on which the audio track is to be replaced, and press the ll to start playback. Search for the Audio Dubbing (ending) point using the , and set the counter to 0:00:00 by pressing CLK/CTR and CLEAR. Search back slightly beyond the Audio Dub start point using the button. ll button one more time to make PAUSE mode. 7 7 8 2 When you have finished recording, press s . Recording from Another VCR or Camcorder You can copy a cassette to your DVD-V5000 from another video source, such as another VCR or a camcorder. 6 7 1 It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright. Press A. DUB. [. . . ] Re-tune your TV to the DVD-VCR again by following instructions "Tuning Your Television for the DVD-VCR" (page 13). If the problem still exists repeat steps 1 to 5 moving several more channels away from the original setting. If you are unable to solve the problem after reading the above instructions, note: x The model and serial number on the rear of your DVD-VCR x The warranty information x A clear description of the problem Then contact your nearest SAMSUNG after-sales service. 62 63 01479A DVD-V5000/XSA-GB5 9/5/56 8:09 AM Page 64 Troubleshooting Guide (DVD) GB Before requesting service (troubleshooting) Problem x x x Action Ensure that the disc is installed with the label side facing up. This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. 5. 1 channel sound is reproduced only when the following conditions are met. [. . . ]