User manual SAMSUNG SV-DVD545

[. . . ] DVD-VCR SV-DVD440 SV-DVD540 SV-DVD545 STANDBY/ON OPEN/CLOSE AUX OK PAL www. samsungvcr. com Remote Control Overview (SV-DVD540/SV-DVD545) STANDBY/ON OPEN/CLOSE ( SV-DVD440 ) STANDBY/ON OPEN/CLOSE OK OK Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGER This symbol is intended to alert you to the presence of dangerous voltage within the product. CAUTION. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER TO QUALIFIED SERVICE PERSONNEL. CAUTION This symbol is intended to alert you to the presence of important instructions accompanying the product. IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. [. . . ] , input 5 Start playing back the cassette to be copied. 6 Hold REC (q) down for a while to start recording on your DVD-VCR. 7 When you have finished recording, press s on both VCR and DVD-VCR. If several codes are indicated for your television brand, try each one in turn until you find one that works. When you change the batteries in the remote control, you must reprogramme the code, following the same procedure. You can then control the television using the following buttons. VOL + or ­ PROG/TRK ( or ) TV MUTE Function Used to switch the television and DVD-VCR on and off. Used to switch between the TV and VCR modes. Used to adjust the volume of the television. Used to mute the volume of the television. If you wish to view the cassette being copied: x Your DVD-VCR must be connected as usual to the television (see page 9 for further details) The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly. ENG-29 Choosing a Connection Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. The following show examples of connections commonly used to connect the DVD -VCR player with a TV and other components. The VCR out can not watch by this connection. Connection to an Audio System Connection to a Television Using the Disc Menu Language 1 With the unit in Stop mode, press the MENU button. 2 Select DVD using , buttons, then OK or button Television Setup Setup Display Setup Setup : Dolby Digital Decoder Digital Audio Input Jack COAXIAL OPTICAL 3 Select Language Setup using press the OK or button. , buttons, then Language Setup Disc Menu Audio Subtitle : English : English : Automatic or COAXIAL OPTICAL 5 SV-DVD540 /SV-DVD545 4 Select Disc Menu using the OK or button. S-Video Jack , buttons, then press Digital Audio out Jack 5 Use the , buttons to select English. - Select "Others" if the language you want is not listed. Disc Menu Language Disc Menu 6 Press the OK button. - English is selected and the screen returns to DVD menu. ENG-30 Setting Up the Language Features Using the Audio Language 1 With the unit in Stop mode, press the MENU button. 2 Select DVD using , buttons, then OK or button. , buttons, then 3 Select Language Setup using press the OK or button. Using the Subtitle Language 1 With the unit in Stop mode, press the MENU button. 2 Select DVD using , buttons, then OK or button. , buttons, then 3 Select Language Setup using press the OK or button. Language Setup Disc Menu Audio Subtitle : English : English : Automatic Disc Menu Audio Subtitle Language Setup : English : English : Automatic 4 Select Audio using OK or button. , buttons, then press the 4 Select Subtitle using OK or button. 5 Use the , buttons, then press the 5 Press the , buttons to select English. - Select "Original" if you want the default soundtrack language to be the original language the disc is recorded in. - Select "Others" if the language you want is not listed. , buttons to select English. - Select "Automatic" if you want the subtitle language to be the same as the language selected as the audio preference. Subtitle Language Automatic Subtitle 6 Press the OK button. [. . . ] Press power on from a cold start with no disc in the unit. Press the and buttons simultaneously on the front panel for five seconds. Switch off and on the DVD-VCR by pressing STANDBY/ON button. The Parental Mode is now unlocked as indicated on the display. [. . . ]