User manual SAMSUNG SV-DVD641

[. . . ] Infrared Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deciding How to Connect DVD-VCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you wish to cancel the recording before the end, press STANDBY/ON. 12 13 14 15 6 7 LENGTH 2:30 SET LENGTH : PRESS REC q 8 If the end of the tape is reached while recording: x The recording stops 30 31 VCR GB Checking a Preset Recording Playing a Cassette This function allows you to play back any pre-recorded cassette. VCR GB You can check your preset recordings: x When you have finished presetting the DVD-VCR x If you have forgotten which programmes will be recorded PR 1 -----" 1 2 Switch on both the television and your DVD-VCR. If the safety tab on the cassette is intact, press ll. Otherwise, the cassette is played automatically. 3 2 1/JAN TUE 12:09 DAY STARTSTOP SA 9 12:0012:50SP ---- --:----:------- --:----:------- --:----:------- --:----:------- --:----:--- 1 2 3 4 Press TIMER on the remote control. Result: The timer programme is displayed. Press the " or buttons to select the required programme. Press the or buttons to select and change any values as required. For more details, refer to the previous page. RETURN DELETE:CLEAR When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this DVD-VCR. (EJECT). REC SELECT EJECT 3 On completion, press RETURN twice. To. . . Stop the playback Eject the cassette 3 COPY LINE IN 2 Adjusting Picture Alignment Automatically The Picture Alignment feature enables you to optimize the tape position automatically to obtain the best possible picture. VCR VCR Cancelling a Preset Programme When noise bars or streaks appear during playback, adjust picture alignment by pressing the A. TRK button. To return to normal playback mode, press the II button. If you press and HOLD down the (or button the VCR will ) search at 9 times the normal speed. Releasing the button will return the VCR to search at 5 times the normal speed. To return to normal playback mode, press the II button. Whilst in Picture Search mode, if you press the button again, the VCR will enter normal Fast Forward mode. Likewise, whilst in Picture Search mode, if you press the button again, the VCR will enter normal Rewind mode. If, when Redwinding ( or Fast Forwarding ( you press the ) ), (or button, the VCR will enter the Picture Search mode. ) The tape counter: x Indicates the elapsed time in the play and record modes (hours, minutes and seconds) x Is reset when a cassette is inserted in the DVD-VCR x Allows you to find the beginning of a sequence easily 2 3 1 2 If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 4 5 6 0:00:00 Insert a cassette in your DVD-VCR. To set the tape counter to zero at the beginning of a sequence: x Press DISPLAY twice to display the counter x Press CLEAR when you want to set the tape counter to zero When you are ready, x Start playback or Recording. x To fast-forward or rewind to the sequence at which the counter was set to zero, press or . 2 2 3 VCR Searching for a Specific Sequence Each time you record a cassette on this VCR, an "index" is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. [. . . ] Remove the aerial input plug from the socket marked (aerial symbol) on the rear of the DVD-VCR. Carry out the instructions "Tuning Your Television for the DVDVCR" (see page 14). Carry out the instructions "Setting the DVD-VCR output Channel" (see page 23), move the channel number several channels down from the original setting. Replace the aerial plug into the socket marked (aerial symbol) on the rear of the DVD-VCR. [. . . ]