User manual SAMSUNG SV-M12K

[. . . ] REWIND/REVERSE PICTURE SEARCH BUTTON (MENU SELECTION BUTTON) 7. STOP BUTTON (MENU SELECTION DOWN BUTTON) 8. FAST-FORWARD/FORWARD SEARCH BUTTON (MENU SELECTION BUTTON) Inserting Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: x Purchase the video cassette Recorder x Find that the remote control is no longer working correctly 1 Push the tab in the direction of the arrow to release the battery compartment cover on the rear of the remote control. 2 Insert two AA, R6 or equivalent batteries, taking care to respect the polarities: x + on the battery with + on the remote control x ­ on the battery with ­ on the remote control 3 Replace the cover by aligning it with the base of the remote control and pushing it back into place. Do not mix different battery types (manganese and alkaline for example). ENG-2 Tuning Your Television for the VCR Aerial (Not supplied) Aerial Connector Selecting the RF OUT Sound Mode (G, K) You must choose the sound mode (G or K) according to the TV set connected to your VCR. TV AV input RCA Cable (Not supplied) 1 Press MENU on the remote control. Result: The programming menu is displayed. Aerial input 2 AUDIO LINE OUT LINE IN 1 2 Press the corresponding TV Coaxial Cable VIDEO or buttons, to select the INSTALLATION option. Result: The INSTALLATION menu is displayed. [. . . ] B/W Black and White 3 Insert the video cassette to be played. If the safety tab on the cassette is intact, press button. Otherwise, the cassette is played automatically. When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. 4 Press the corresponding 5 Press the 3 To. . . Stop the playback Eject the cassette Then press. . . (EJECT). 6 On completion, press MENU twice to exit the menu. Intelligent Picture Control Adjusting Picture Alignment Manually The Fine Adjustment feature allows you to adjust the alignment manually to obtain the best possible picture. When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK ( or ) buttons until the picture is clear and stable. x The tracking bar disappears when you release the button. Intelligent picture control feature allows you to adjust the sharpness of the image automatically according to your own preferences. 1 During playback, press the MENU button on the remote control. Result: The menu is displayed. 2 Press the corresponding the USER SET option. or buttons, to select 3 Press the button to select this option. or buttons, until the cursor is placed in front of the IPC option. Press the IPC button on the remote control. Result: The PICTURE menu appears on the display. When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. 4 Press the corresponding 5 Press the button to select the IPC (intelligent Selecting the Appropriate System Standard Before recording a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. 6 To adjust the sharpness manually, press the button to turn the IPC mode OFF. x When playing back a cassette, the standard is automatically selected by the VCR. x When you playback an NTSC-recorded tape on this VCR make a setting on the color system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4. 43 compatible), set NT4. 43 and you can record NT4. 43. 7 Press the or buttons until the picture is displayed according to your preferences. To adjust the sharpness manually press the SHARPNESS or button on the front of the VCR. If you do not press a button within ten seconds, the PICTURE menu disappears automatically. 8 On completion, press the MENU button again. ENG-4 Playing a Sequence Frame by Frame You can: x Stop the cassette at a given frame (image) x Advance one frame at a time Playing a Cassette in Slow Motion You can play a cassette in slow motion. No sound is heard when playing back a cassette in slow motion. No sound is heard when playing back frame by frame. 1 x x x 1 Press: x to start playing the cassette x ll P/S to stop the tape at a given frame x ll P/S to advance frame by frame Press: to start playing the cassette SLOW ( or ) as many times as required to decrease or increase the speed respectively to return to the normal speed or ) 2 To return to normal playback, press . 2 When playing back in slow motion, picture interference may occur. Press the TRK ( buttons to minimize this effect. Vertical stability: When playing back frame by frame, interference may be seen on the screen. Press the TRK ( or ) buttons to minimize this effect. Using the Tape Counter The tape counter: x Indicates the elapsed time in the play and record modes x Is reset when a cassette is inserted in the VCR x Allows you to find the beginning of a sequence easily When you have been using the Slow Motion function for more than about two minutes, the VCR will automatically play to protect the: x Cassette x Video heads Selecting the Cassette Type If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted. If the remaining time is to be calculated correctly, you must indicate the type of cassette being used. 1 Insert a cassette in your VCR. [. . . ] 3 Select the recording speed (SP/LP) by pressing the SPEED button. 4 Begin playback on the playback side VCR and hold down REC (q) button. 5 Press the STOP (s) button to end line recording. You can copy a cassette to your VCR from another video source, such as another VCR. It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright. Video cassettes have a safety tab to prevent accidental erasure. [. . . ]