User manual SAMSUNG SV-R960PRT

[. . . ] SVR-24PRT SVR-960PRT Time Lapse Recorder Installation and Operating Instructions IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. Retain Instructions - The safely and operating instructions should be retained for future reference. Head Warnings - All warnings on the unit and in the operating instructions should be adhered to. [. . . ] · Use the same method for setting PROGRAM REC as in the PROGRAM SETUP 1. * When finished with PROGRAM SETUP 1, 2 press MENU to end and press POWER to begin standby. · · · · · · OFF 13:03 13:15 MON PROGRAM SETUP2 POWER L40H PROGRAM SETUP1 END:MENU ( /­ +, CLEAR) END:MENU ( /­ +, CLEAR) REC 5. Press the TRACKING/SET "+" or "­" buttons to set the minute of the starting time. You can use only the POWER or RESET buttons during PROGRAM REC. By the same methode, set up the ending time 2. During a PROGRAM REC, to and move to the date. cancel the recording press the POWER button. Press the TRACKING/SET "+" or "­" buttons to 3. To cancel a PROGRAM REC, select the set monday and press SHIFT !button. event and press CLEAR button to display "OFF". Press the TRACKING/SET "+" or "­" buttons to Pressing the SHIFT !button again in set L8H and press SHIFT !button. the OFF position to toggles the time set before. By the same method, set up the NEXT PROGRAM REC which you may want. · DAILY : The programmed recording is made at the same time every day. CAUTION REC C. MEMO * The tape will be ejected and the beeper will sound if the tape safety tab has been removed. ­ CHECKING POWER FAILURE TIME AND DATE. 7 POWER LOSS MEMORY POWER LOSS MEMORY YEAR DATE TIME 2002 12/25 15:00:00 2002 12/25 15:15:37 2002 12/24 13:25:00 2002 12/24 13:26:00 2002 12/23 17:30:30 2002 12/23 17:40:00 END:MENU · Displays the memorized time of a power failure and power restore. * example) If there was a power failure on 17:30:30 12. 2002, and a power restore on 17:40:00 12. (17:30:30= 17 Hours 30 minutes 30 seconds) * example) If there was a power failure on 13:25:00 12. 2002 and a power restore on 13:26:00 12. OFF ON 2002 2002 2002 2002 12/24 12/24 12/23 12/23 13:25:00 13:26:00 17:30:30 17:40:30 REFERENCE · · · OFF ON OFF ON OFF ON You can set up to 10 programs a week · The screen displays the three most recent events. The most recent power failure is listed first. 19 20 MENU 13:03 13:15 MON 13:03 13:15 DAILY PROGRAM SETUP1 START STOP DATE MODE L8H L24H · · · · · · PROGRAM SETUP2 START STOP DATE MODE OPERATION BASIC PLAYBACK OPERATION REC F. F During normal playback To Return to normal playback P/STILL PLAY W RE P/STILL CK REC CHE 1 Press the POWER button on the VCR and insert the tape. · When a tape is inserted the VCR is automatically turned on. 2 Press the button when necessary. PLAY P/STILL For still PLAY W RE W RE ECT STOP/EJ F. F F. F O VIDE RITY ECU S REV ON AUDIO HIGH PICTURE RESET REC LOCK AR O CLE CNT. MEM COUNT PLAYBACK POWER For forward search W RE W RE CK REC LO F. F F. F ER POW HIGH RE PICTU For reverse search STOP/EJECT TIME MODE TRAC SHIFT CK V-LO ET KING/S MENU Insert the tape with the window facing up. STOP During stop W RE EJECT STOP/EJECT For fast forwarding W RE For fast rewinding REFERENCE · Set the time mode to L8H(L6H) for normal viewing and sound when you playback a rental tape. · The standard tape may happen some noise in the still mode. · Slow playback and time mode cannot be set in still mode. Note the following when playing back the tape recorded in timelapse mode: · Although the screen may have no color during picture search, it does not indicate any malfunction or trouble. [. . . ] · Check to see whether the head is dirty. · Press the "TRACKING" button on the front pane l of the video for adjustme nt or clean the head using the cleaning tape. The tape cannot be inserted. Won't Eject eject button after VCR · Press power button then first turns on. is the programmed recording · Check to see whether set. The tape cannot be ejected. No program recording. No editing with other equipment. The record button does not function. Playback picture is noisy. Won't Program record rding is set 19~20 · Make sure program reco properly. [. . . ]