User manual SAMSUNG SW-252S

[. . . ] Index Connecting the Cables Main Page Safety Precautions Notational Installation While Operating Other Using the Drive Using the CD-R/RW Drive Storing and Cleaning Your Discs MAGIC SPEED Upgrading the Firmware Flash Memory System Requirements Introduction Front Rear Troubleshooting Solving Recording Problems Caution with errors Solving Technical Problems Setup Installing the CD-R/RW Drive Connecting the Cables Installing the CD Record Utility Installing the Device Driver Setting Up the Device Driver Specifications Safety Precaution Connecting the Cables Warning / Caution Warning : This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death could result. Caution : This symbol indicates explanations about dangerous matters. If users ignore this symbol and handle the device the wrong way, damage to home or property could result. [. . . ] Store a disc vertically in a well-ventilated and stable location. Do not write or attach a label on a disc. Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Do not leave the disc compartment open when you are not using it. Using the Drive Connecting the Cables What is a MAGIC SPEED? The MAGIC SPEED provides a function that user optionally chooses the disc reading speeds, high speed (Max speed) mode and low noise (X32) mode. The low noise mode offers the best PC environment by minimizing a driving noise. The Magic speed not only functions to decrease a noise by reducing a reading speed but also gets a preventive effect of a disc breakage, which could be occurred by a high speed. Its purpose is to supply the stable PC environment to user. Explanation of MAGIC SPEED Mode and Ways to use Explanation of MAGIC SPEED Mode The Maximum Speed Mode : Set up this mode when you want to read a disc by the maximum speed which is supplied by a drive. The Low Noise Mode : Set up this mode when you want to read a disc by a stable speed, the low speed (X32). The mode selected and set using the Magic Speed feature does not change when you connect the driver to a different PC. Make sure you check the settings before use. Caution: In case of a cracked disc, the disc would be broken if operating in the maximum speed. Therefore, it is recommended to operate in the low noise mode or to immediately make a copy and use it. Ways to Use the MAGIC SPEED The first of all, please install the Magic Speed program from Samsung's homepage. Operate the program by clicking the right mouse button on the MAGIC SPEED Tray Icon. Select a desired mode from a program window, and click "Setup" The reading speed of a drive operates in a selected mode. Close the program window by selecting "Close". At this time, the reading speed will keep operating by the changed speed unless you would change a mode and would end a program. It is recommended to use a "Maximum Speed Mode" when operating a Data Copy & a Disc Copy and to use a "Low Noise Mode" when operating a general operation. Other Function Method to release an automatic operation: This program automatically operates when PC is booting. Do not work on a multi-tasking environment and remove screen savers. [. . . ] - Http://samsung-ODD. com - Http://samsung. com This case may occur when there is a Windows installation problem; reinstall Windows. Check whether the audio cable is correctly connected to the sound output terminal on the CD-R/RW drive and the sound card CD-IN terminal. Check that the sound card is operational. If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel. The CD-R/RW drive is not detected by Windows. [. . . ]