User manual SAMSUNG SW10C1S

[. . . ] q The instructions for use shall specify the maximum mass or dry cloth in kg, for which the appliance is designed. q If the appliance is supplied from a cord extension set or electrical portable outlet device the cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing or ingress q Young children should be supervised to ensure that they do not play with the appliance. q If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similary qualified person in order to avoid a hazard. 3 INSTALLATION & MAINTENANCE ENVIRONMENT Leave some space Maintain at least 10cm between the washer and the wall. CONNECTING THE DRAIN HOSE After pressing the joint ring(a), insert the drain hose(b) to drain direction. (a) 1 Place the washer on a sturdy flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1° ) Adjust the legs for even placement. [. . . ] q Place the machine more than 10cm away from the wall. q Adjust the legs on feet for levelling . Loosen Lock 5 MAKE SURE TO KEEP THE FOLLOWING TO PREVNENT ELECTRIC SHOCKS AND LEAKAGE! Earthing is necessary to prevent leakage or electric shocks caused by the electric currents leaked from the machine. How to earth with an outlet with earthing terminals Outlet with earting terminals: q Even when the internal wires of the earthing terminals are joined, be to connect the earthing conductor (geen) of the machine to the tap. When connecting to a metal water pipe: q There is no earthing effect in case the water pipe is made of synthetic resin(plastic) When using an extension cord and a boosting transformer: q Make sure that the earthing conductor is connected. Other earthing methods When connecting to a copper plate: q Connect the earthing conductor to a copper plate and bury it 25cm deep in the wet ground. When installing at a place where earthing is impossible: q Connect a standard leakage breaker to the outlet. Never make an earthing to q The telephone line, lightning rod, or gas pipe as it is extremely dangerous in case of lightning strikes. WASHING INSTRUCTION PROCEDURE 1. Sort the laundry into separate wash loads. Each load of washing should contain clothing which needs the same washing conditions. For example, you should not wash delicate clothes with very dirty work clothes. POWER 2. Load the laundry into washing. Before load, check all pockets, and close zippers, hooks and eyes. 3. (see page 7) If you choose "FUZZY" program you don't need to select water level. Water level is set automatically at "FUZZY" program. Press straight the START/HOLD button. COURSE 7. Choose the water level. Before choose water level, remember following things. When you choose FUZZY, HEAVY-DUTY, ECONO WASH, WOOL, BLANKETprogram, water level is selected automatically, but if you want to choose water level manually you can slelect. EXTRA LOW, LOW, MEDIUM, HIGH WATER LEVEL 8. Choose the water temperature. Before choose water temperature, remember following things. 1) You can choose HOT, HOT+COLD, COLD to all programs except for and delicate program. 2) When you choose or delicate program, water temperature is selected warm wash and warm rinse automatically. WATER SUPPLY 9. Close the lid. START HOLD WASH PROGRAM FUZZY Wash Time Wash Action Wash Temp Deep Rinse Spin Time Cold 5 min 15 min Normal HEAVY DUTY 18 min Normal ECONO WASH 5 min Gentle WOOL 15 min Gentle BLANKET 6 min Gentle Cold Cold 5 min Cold 1 min Cold - Cold + Hot - Hot Cold 5 min Cold 3 min 6 WASHING PROCEDURE Before starting washing, check the following; Connect the water supply hose to the water tap. -Fasten buttons and turn inside out before washing. -Use the detergent indicated in the laundry. [. . . ] Washing goes on for 18 minutes. When the FUNCTION button is pressed during washing, the wash time can be changed to between 3 and 25 minutes in duration. POWER FUNCTION Function Button START HOLD four times START HOLD RINSE ONLY Press the FUNCTION button five times. Rinsing goes on for 15 minutes. When the FUNCTION button is pressed during rinsing, the rinse times can be changed to between 1 and 5 times in duration. POWER FUNCTION Function Button five times SPIN ONLY Press the FUNCTION button six times. Spin drying goes on for 10 minutes. When the FUNCTION button is pressed during spinning, the spin time can be changed to from 5 to 11 minutes. POWER FUNCTION Function Button START HOLD six times START HOLD WASH AND RINSE Press the FUNCTION button seven times. [. . . ]