User manual SAMSUNG SWT55B3

[. . . ] · Ventilation opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. · If the supply cord of this appliance is damaged, it must only be replaced by a repair shopappointed by the manufacturer, because special purpose tools are required. · Warning to avoid overfilling and damages this appliance must be filled with the operator present using a moderate water supply pressure only. · Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. [. . . ] (In case no drain pump) · Place the drain hose in sink or bath. (In case no drain pump) · Connect the power cord to the power supply outlet. Wash Spin TO SPIN DRY 1. Transfer the clothes into the spin basket and arrange the clothes evenly. TO RINSING 1. Set the CYCLE SELECTOR KNOB to `WASH. RINSE'. (In the case of drain pump `WASH') CYCLE SELECTOR CYCLE SELECTOR Wash/Rinse Wash Drain Rinse Drain 2. Be sure to replace the safety cover and close the inner lid inner lid. Supply the proper amount of water so as not to delete one space overflow the top of the washing tub. 0 15 3 2. Set the WTER SELECTOR KNOB to the desired mode. WATER SELECTOR 3. Set the CYCLE SELECTOR KNOB to "WASH. RINSE". (in case drain pump WASH) Wash/Rinse Wash 3. Set the delete one space cycle selector KNOB to `DRAIN'. 0 5 1 12 9 6 WASH TIMER Drain Rinse Drain CYCLE SELECTOR CYCLE SELECTOR 4. Set the SPIN DRY TIMER 1-5minutes. 5. Repeat this cycle until drain water is clean. Fill water in the wash tub and add the detergent. Load laundry in the wash tub and fill water to proper water level. 0 3 OVER FLOW RINSE 1. Keep supplying water(adjust water pressure to ensure that the amount of CYCLE SELECTOR water supplied does not exceed the amount of water drained. ) Wash/Rinse Wash SPIN DRY TIMER Drain Rinse Drain CYCLE SELECTOR 6. After washing, set the CYCLE SELECTOR KNOB to 'DRAIN' for drain. 15 3 0 15 3 12 9 6 WASH TIMER 2. As soon as the WASH TIMER shuts off, turn off the water tap. Set the CYCLE SELECTOR KNOB to `DRAIN'. 3 12 9 6 WASH TIMER 0 15 3 12 9 6 WASH TIMER INSTALLATION ADDITIONAL RINSE 1 After rinsing you can select this course for more effective rinse (Don't just select this course for rinse. ) Load the laundry evenly into the spin basket. 2 Set the WATER SELECTOR KNOB to SPIN and Wash Spin CYCLE SELECTOR KNOB to `DRAIN'. WATER SELECTOR 3 Supply water for about 1 minute. Adjust the water flow to prevent overflow from the wash tub. [. . . ] The spin dryer hatch is fixed to the brim by the concave and convex AFTER OPERATION parts at two places. Close the water tap and disconnect the water the spin dryer hatch to supply hose. - Periodical cleaning will extend the life of your 4. firmly until the catch at the front is securely - Do not spray the unit water or use tinner, benzene, attached. [. . . ]