User manual SAMSUNG SYNCMASTER 460PN

[. . . ] Install Pro grams SyncMaster 460Pn/460P Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. [. . . ] Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBrightTM control button. - The direct button on the remote control is 'M/B' button. 1) Entertain : High brightness For watching motion pictures such as a DVD or VCD. 2) Internet : Medium brightness For working with a mixture of images such as text and graphics. 3) Text : Normal brightness For documentations or works involving heavy text. 4) Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 2) Brightness : Adjust the Brightness. If you adjust picture using Custom function, MagicBright will turn to Custom mode. Color Tone The tone of the color can be changed. 1) Cool 2) Normal 3) Warm 4) Custom Color Control Adjust the individual R, G, B color controls. 1) Red 2) Green 3) Blue If you adjust picture using Color Control function, Color Tone will turn to Custom mode. Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1) Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. 2) Fine : Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). 3) Position : Adjusts the screen location horizontally and vertically. The values of Fine, Coarse, position are adjusted automatically. If you change resolution in the control panel, auto function will be executed. - The direct button on the remote control is 'AUTO' button. Used to make up for the weak RGB signal which has been transmitted by a long signal cable. [. . . ] However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. [. . . ]