User manual SAMSUNG SYNCMASTER 711MP

[. . . ] Install Drivers Install Programs SyncMaster 711MP Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. [. . . ] If you change resolution in the control panel, Auto function will be executed. - The direct button on the remote control is 'AUTO/PRE-CH' button. 1) Coarse 2) Fine 3) Sharpness 4) Position Auto Adjustment TV / Ext. / AV / S-Video Mode Available Mode OSD Mode Description : PC : TV : Ext. : AV : S-Video Play / Stop The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie", and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings. - The direct button on the remote control is 'P. MODE' button. 1) Dynamic 2) Standard 3) Movie 4) Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 3) Sharpness : Adjust the picture sharpness. 5) Tint : Adds a natural tone to the display. PAL channels do not support the Tint (Tint) menu. Channel > Manual Store > Colour System is only available in NTSC 4. 43. Custom Colour Tone The tone of the colour can be changed. The individual colour components are also user adjustable. 1) Cool2 2) Cool1 3) Normal 4) Warm1 5) Warm2 Sound Available Mode OSD Mode Description : PC : TV : Ext. : AV : S-Video Play / Stop The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings. 2) Music : Choose Music when watching music videos or concerts. 3) Movie : Choose Movie when viewing movies. 4) Speech : Choose Speech when watching a show that is mostly dialogue (i. e. , news). 5) Custom : Choose Custom if you want to adjust the settings according to personal preference. The sound settings can be adjusted to suit your personal preference. 1) Bass : Emphasize low frequency audio. 2) Treble : Emphasize high frequency audio. 3) Balance : Allows you to adjust the sound balance between the left and right speakers. [. . . ] However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. [. . . ]