User manual SAMSUNG SYNCMASTER 720N

[. . . ] SyncMaster 720N Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. [. . . ] Information Brightness Color Tone Coarse Language Image Reset Contrast Color Control Fine H-Position Color Reset Gamma Sharpness V-Position H-Position Transparency V-Position Display Time Picture Menu Description You can use the on-screen menus to change the brightness according to personal preference. Direct Access Feature : When OSD is not on the screen, Push the button to adjust brightness. MENU , MENU Play/Stop Brightness Contrast You can use the on-screen menus to change the contrast according to personal preference. MENU , , MENU Color Menu Description The tone of the color can be changed and one of four Play/Stop Color Tone modes can be selected - Cool, Normal, Warm and Custom. MENU , , MENU Adjusts individual R, G, B color balance. Color Control MENU , , , MENU Gamma correction changes the luminance of the colors with intermediate luminance. Gamma Mode 1 Mode 2 Mode 3 MENU , , , MENU Image Menu Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu. MENU , , MENU Play/Stop Coarse Fine Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). MENU , , , MENU Changes the clearance of image. Sharpness MENU , , , MENU H-Position Changes the horizontal position of the monitor's entire display. MENU , , , MENU V-Position Changes the vertical position of the monitor's entire display. MENU , , , MENU OSD Menu Description Change the language used in the menu. You can choose one of the seven languages. Play/Stop Language Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU , , MENU H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU , , , MENU V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU , , , MENU Change the transparency of the background of the OSD. Transparency MENU , , , MENU Display Time The menu will be automatically turn off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]