User manual SAMSUNG SYNCMASTER 940MW

[. . . ] SyncMaster 940MW Install Driver Install Program Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. [. . . ] Edit Name Name the input device connected to the input jacks to make your input source selection easier. AV S-Video Component PIP Source Size Position Picture PC / DVI Available Source List OSD Description : PC / DVI : TV : Ext. : AV : SVideo : Component Play/Stop MagicBrightTM MagicBrightTM is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBrightTM control button. - The direct button on the remote control is 'M/B' button. Entertain For watching motion pictures such as a DVD or VCD. Internet For working with a mixture of images such as text and graphics. Text For documentations or works involving heavy text. Custom Although the values are carefully chosen by our engineers, the preconfigured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. If you adjust picture using Custom function, MagicBright will turn to Custom mode. Colour Tone The tone of the color can be changed. Available in PC/DVI Mode Only The individual color DTVs are also user customizable. PC : Cool / Normal / Warm / Custom DVI : Cool / Normal / Warm Adjust the individual R, G, B Colour Controls. - Available in PC Mode Only Red Green Blue If you adjust picture using Colour Control function, Colour Tone will turn to Custom mode. Image Lock Image Lock is used to fine tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. - Available in PC Mode Only Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu. Fine : Removes noise such as horizontal stripes. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]