User manual SAMSUNG SYNCMASTER G19P

[. . . ] SyncMaster G19P Install drivers Install programs Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or countries). Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. [. . . ] [MENU/ ] Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. [ ] This button allows you to adjust items in the menu. [ ] Press this button to activate a highlighted menu item. [AUTO] Press to self-adjust to the incoming PC signal. The values of fine, coarse and position are adjusted automatically. AUTO Menu Description When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) AUTO To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock When pressing the AUTO after locking the OSD When pressing the MENU button after locking the OSD Menu Description This is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings. Lock : Hold down the menu button for more than five seconds to activate the OSD adjustment lock function. Locked Unlock : Hold down the menu button for more than five seconds to deactivate the OSD adjustment lock function. Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust MagicBright ( ) using the Direct button. MagicBrightTM Menu MagicBrightTM Description Push the MagicBright button to circle through available preconfigured modes. - Six different modes (Custom/Text/Internet/Game/Sport/Movie) Brightness Menu Brightness Description When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu SOURCE Description Selects the video signal while the OSD is off. Picture Color Image OSD Setup Information Brightness MagicColor Coarse Language Auto Source Contrast Color Tone Fine H-Position Image Reset Color Control Sharpness V-Position Color Reset Gamma H-Position Transparency V-Position Display Time Picture Menu Description You can use the on-screen menus to change the brightness according to personal preference. Play/Stop Brightness Direct Access Feature : When OSD is not on the screen, push the [ ] button to adjust brightness. [MENU , MENU] Contrast You can use the on-screen menus to change the contrast according to personal preference. [MENU , , MENU] Color Menu Description MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality. 2) Demo - The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left. 3) Full - Displays not only vivid natural color but also more realistic natural skin color with clearness. 4) Intelligent - Displays vivid natural color with clearness. [MENU , , MENU] Play/Stop MagicColor Color Tone The tone of the color can be changed and one of four modes can be selected - Cool, Normal, Warm and Custom. [MENU , , , MENU] Color Control Adjusts individual R, G, B color balance. [MENU , , , , MENU] Gamma correction changes the luminance of the colors with intermediate luminance. Gamma Mode 1 Mode 2 Mode 3 [MENU , , , MENU] Image Menu Description Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. (Available in analog mode only) [MENU , , MENU] Play/Stop Coarse Fine Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed). (Available in analog mode only) [MENU , , , MENU] Sharpness Changes the clearance of image. [MENU , , , MENU] H-Position Changes the horizontal position of the monitor's entire display. (Available in analog mode only) [MENU , , , MENU] V-Position Changes the vertical position of the monitor's entire display. [. . . ] During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. [. . . ]