User manual SAMSUNG SYNCMASTER S19B150N

[. . . ] SyncMaster S19B150N/S22B150N/S24B150NL Monitor User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-4 INSTALLING THE PRODUCT Package Contents . 2-4 USING THE PRODUCT Setting the Optimal Resolution . 3-4 Using the Screen Adjustment Menu (OSD: On Screen Display) . [. . . ] Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information, refer to the document about the Windows operating system. Using the product 3-3 3-4 Product Operating Buttons Product Operating Buttons · · · · · Press one of the buttons on the monitor. If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the menu for the pressed button appears. To go to the menu, press the button on the front of the monitor again. When pressing a button, please press the bottom of a "" displayed below its button label. OSD Guide may vary according to functions and models. ICON DESCRIPTION Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person MENU On: If you press and hold the MENU button down for 10 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 10 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. Users can set the <Customized Key> to one of the following functions. If the user presses the Customized Key [ ] after setting it, the configured function will be performed · < Bright> - <Eco Saving> - <Image Size> You can set the function of the Customized Key by selecting <SETUP&RESET > -> <Customized Key> in the OSD. / Use these buttons to navigate the menu or to adjust a value in the OSD. Use this button to control the brightness of the screen. Use this button to select a function. 3-4 Using the product ICON DESCRIPTION Press [AUTO] button to adjust the screen settings automatically AUTO If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off · · The buttons on the right of the product are touch-type buttons. Touch the buttons lightly with your finger. Power LED This LED is turned on when the product works normally. For more information on the power-saving function, refer to the power saving function in More Information. When not using the product for a long time, unplugging the power cord is recommended to minimize power consumption. Using the product 3-4 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure Top Menus PICTURE Brightness Fine COLOR Color Gamma SIZE & POSITION H-Position V-Position Image Size Menu H-Position Menu V-Position Red Green Blue Color Tone Contrast Sub Menus Sharpness Bright Coarse Reset SETUP&RESET Key Repeat Time Language Customized Key Eco Saving Display Time Off Timer On/Off Menu Transparency Off Timer Setting INFORMATION Monitor functions may vary according to models. Please refer to actual product. PICTURE Menu Controls the screen brightness. Brightness · · This menu is unavailable when < Description Bright> is set to <Dynamic Contrast> mode. This menu is unavailable when <Eco Saving> is set. Controls the contrast of the pictures displayed on the screen Contrast · · This menu is unavailable when < mode. This menu is unavailable when < Bright> is set to <Dynamic Contrast> or <Cinema> Color> is set to <Full> mode or <Intelligent> mode. Controls the clarity of details of pictures displayed on the screen Sharpness · · This menu is unavailable when < mode. [. . . ] Windows ME/2000 : Configure it by selecting Control Panel Display Screen Saver Setting or Configure it in the BIOS Setup of the computer. Windows Vista : Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver. You can also use the BIOS SETUP menu on the PC. Windows 7 : Change settings by selecting Control Panel Appearance and Personalization Personalization Screen Saver. [. . . ]