User manual SAMSUNG SYNCMASTER T200MD QUICK GUIDE

[. . . ] LCD MONITOR quick start guide T200MD/T220MD Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand With stand Monitor Manuals Monitor Quick Setup Guide Warranty Card (Not available in all locations) User's Guide Cables D-Sub Cable Sold separately Power Cord Stereo Cable DVI Cable HDMI Cable Headphones Introduction Sold separately USB Cable TV Antenna Cable (Coaxial Cable) Component(PR, PB, Y) Cable Audio cable Digital audio optic output cable Others Remote Control BN59-00624A Batteries (AAA X 2) (Not available in all locations) Cleaning Cloth Cable holding ring Note Stand Body Stand Base Cleaning Cloth is only provided for highly polished black products as a product feature. Introduction Your Monitor Front Activates a highlighted menu item. Push the ' ', button to change the input signal source. Changing the source is only allowed for external devices connected to the product at the time. [. . . ] When a Scart device is connected to your monitor, the Source automatically changes to Ext. Connecting TV Note You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer. 1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable. · When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. · When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. · To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cable straight. 2. Note Is weak signal causing poor reception?Purchase and install a signal amplifier for better reception. Connections Connecting DVD / DTV Set Top Box Note Connect to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the monitor. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [PR, PB, Y] input ports using a component video cable (PR, PB, Y). Note Select "Component" using the 'SOURCE [ ]' If you connect the PR, PB, and Y component cables to the incorrect terminals, the screen will be displayed in red or blue. For single-family houses, install an UHF antenna to receive digital broadcasting. Connecting HDMI Note You can connect digital output devices to your monitor. You can enjoy better screen and sound quality. Connecting Using a HDMI Cable Connections a. Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor using the HDMI cable. Purchase the CI CAM module by visiting your nearest dealer or by phone. 1. 2. Insert the CI CARD into the CAM in the direction of the arrow until it fits. Insert the CAM with the CI CARD installed into the common interface slot. (Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot. ) 3. Check if you can see a picture on a scrambled signal channel. Connections Connecting Headphone Note You may connect your headphones to the monitor. 1. Connect your headphones to the Headphone connection terminal. Using the Stand Monitor Assembly Monitor and Bottom Tilt angle You can adjust the tilt angle within a range of 5° forward to 25° backward for the most comfortable viewing angle. Troubleshooting Self-Test Feature Check Note · · Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. [. . . ] (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel Display Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). [. . . ]