User manual SAMSUNG T28D310E

[. . . ] ❑❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. NN When you press the INFO button, a channel information banner will appear on the top of the screen. And then press the ENTERE button, you can see the details of the programme. ●● Scroll ◄, ► to view information for a desired programme while watching the current channel. ●● Scroll ▲, ▼ to view information for other channels. ▶ English ❑❑ Memorizing channels ■■ Aerial OO MENUm → Broadcasting → Aerial → ENTERE Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV. ◀ ▶ English ■■ Auto Tuning (depending on the country) OO MENUm → Broadcasting → Auto Tuning → ENTERE NN Automatically allocated programme numbers may not correspond to actual ●● Auto Tuning Aerial (Air/Cable): Select the aerial source to memorise. [. . . ] ●● Motion Lighting: Reduce power consumption by brightness control adapted motion. NN Only available in Standard mode. NN When changing a setting value of Backlight / Brightness or Contrast, Motion Lighting will be set to Off. ◀ ▶ English ■■ Picture Options OO MENUm → Picture → Picture Options → ENTERE NN When connecting a PC, you can only make changes to the Colour Tone. ●● Colour Tone NN Warm1 or Warm2 will be deactivated when the picture mode is ◀ Dynamic. NN Settings can be adjusted and stored for each external device connected to an input on the TV. ●● Digital Clean View: If the broadcast signal received by your TV is weak, you ▶ can activate the Digital Clean View feature to reduce any static and ghosting that may appear on the screen. NN When the signal is weak, try other options until the best picture is displayed. English Auto Visualisation: When changing analogue channels, displays signal strength. ◀ quality. ●● HDMI Black Level: Selects the black level on the screen to adjust the screen depth. ▶ NN Available only in HDMI mode (RGB signals). ●● MPEG Noise Filter: Reduces MPEG noise to provide improved picture NN Only available for analogue channels. NN When the INFO button is pressed, the signal strength bar is displayed. NN When bar is green, you are receiving the best possible signal. English ●● Film Mode: Sets the TV to automatically sense and process film signals from all sources and adjust the picture for optimum quality. NN Available in TV mode and external input mode which supports SD (480i / 576i) and HD (1080i) except in PC mode. NN If the screen does not seem natural, change its option to Off / Auto1 / Auto2 in Film Mode. ●● LED Clear Motion : Removes drag from fast scenes with a lot of movement ◀ to provide a clear picture. NN It will be deactivated when the picture mode is set to Natural. Motion. NN The screen may become slightly darker when you play LED Clear ▶ English ■■ Picture Off t OO MENUm → Picture → Picture Off → ENTERE The screen is turned off but the sound remains on. Press any button except power and volume button to turn on the screen. ■■ Reset Picture OO MENUm → Picture → Reset Picture → ENTERE Resets your current picture mode to its default settings. ◀ ▶ English ❑❑ Changing the Preset Sound Mode ■■ Sound Mode OO MENUm → Sound → Sound Mode → ENTERE ●● ●● ●● ●● ●● Standard: Selects the normal sound mode. Movie: Provides the best sound for movies. Clear Voice: Emphasizes voices over other sounds. Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired. ◀ ▶ NN If Speaker Select is set to External Speaker, Sound Mode is disabled. English ❑❑ Adjusting Sound Settings ■■ Sound Effect (standard sound mode only) OO MENUm → Sound → Sound Effect → ENTERE ●● DTS TruSurround HD This function provides a virtual 5. 1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology. ◀ ●● DTS TruDialog This function allows you to increase the intensity of a voice over background music or sound effects so that dialogue can be heard more clearly. ▶ English ●● Equaliser Use Equaliser to customize sound setting for each speaker. Balance: Adjusts the balance between the right and left speaker. 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies. Reset: Resets the equaliser to its default settings. NN If Speaker Select is set to External Speaker, Sound Effect is disabled. ◀ ▶ English ■■ Speaker Settings OO MENUm → Sound → Speaker Settings → ENTERE ●● Speaker Select t A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker. MUTE buttons will not operate and the sound settings will be limited. NN When Speaker Select is set to External Speaker, the volume and ◀ ▶ English NN When Speaker Select is set to External Speaker. ●● TV Speaker: Off, External Speaker: On NN When Speaker Select is set to TV Speaker. ●● TV Speaker: On, External Speaker: On NN If there is no video signal, both speakers will be mute. ◀ ▶ English ●● Auto Volume To equalize the volume level on each channel, set to Normal. [. . . ] This function only works if the subtitles are the same file name as the video. Picture Mode / Sound Mode: You can adjust the picture or sound setting. Audio Language: You can change the audio language if the video has more than one language. Information: You can see detailed information about the played file. ◀ ▶ English NN If video time information is unknown, play time and progress bar are not displayed. NN In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. ●● Supported Subtitle / Video Formats NN For the details, refer to User Manual. ◀ ▶ English ● Music Button Repeat Shuffle Sound Mode Operation You can play music files repeatedly. [. . . ]