User manual SAMSUNG TB-WH

[. . . ] User Manual TB-WH TB-CH The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00204A-05 Table Of Contents BEFORE USING THE PRODUCT 5 5 5 Copyright Icons used in this manual Symbols for safety precautions 6 6 7 9 Safety Precautions Electricity and Safety Installation and Safety Operation and Safety PREPARATIONS 13 13 14 Checking the Contents Removing the Packaging Checking the Components 15 15 16 17 Parts Button Reverse Side Right Side View 18 18 20 21 Installation Reassembly Adjusting the Product Height Anti-theft Lock USING "WINDOWS EMBEDDED STANDARD 7" (TB-WH) 22 23 23 24 24 25 25 26 26 27 What is "Windows Embedded Standard 7" Client?Connection to Use "Windows Embedded Standard 7" Before Connecting Connection Using the D-SUB Cable (Analogue Type) Connection Using the DVI Cable Connecting a Microphone Connecting to Headphones or Speakers LAN Connection Connecting USB Devices Connecting the Power Table Of Contents 2 Table Of Contents 28 28 28 29 36 37 Using "Windows Embedded Standard 7" Logon "Windows Embedded Standard 7" Desktop Programs Configuring Utilities Recover the System 38 38 MagicRMS Pro About MagicRMS Pro USING THE "ZERO CLIENT" (TB-CH) 39 40 40 41 41 42 42 43 44 About "Zero Client" Connection to Use the "Zero Client" Before Connecting Connection Using the D-SUB Cable (Analogue Type) Connection Using the DVI Cable Connecting a Microphone Connecting to Headphones or Speakers Connecting to a Server (LAN/USB Connection) Connecting the Power 45 45 45 46 Using the "Zero Client" Login Message Box Toolbar TROUBLESHOOTING GUIDE SPECIFICATIONS 69 69 Requirements Before Contacting Samsung Customer Service Center Check the following. 70 71 General Power consumption Contact SAMSUNG WORLD WIDE APPENDIX 72 Table Of Contents 3 Table Of Contents 78 78 78 Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Correct disposal of batteries in this product INDEX Table Of Contents 4 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. [. . . ] This item is activated when the EWF is running. If this item is selected, the current states of the client (saved in a cache) are saved to a flash volume. However, the state of EWF will not be changed. You can also perform this operation by entering “ewfmgr. exe c: -commit” at the command prompt. You can view the configurations for the protected volumes by entering “ewfmgr. exe c:” at the command prompt. File-Based Write Filter (FBWF) The File-Based Write Filter (FBWF) protects the memory of the client from being overwritten by any unauthorized user. By restricting excessive writing into the memory, the FBWF allows you to use the client for a long time. If you request I/O, the FBWF has the client perform its operations using the cache instead of the memory so that the memory can be protected. The data saved in the cache is preserved while the client operates normally. It is removed when it is restarted or exited. To save the changes, you should write the relevant file onto the disk using the commit command. If you don’t know which file is changed, disable the FBWF, change it, and enable it again. You can control the FBWF using the various options of the command at a command prompt.  FBWF Configuration  Current FBWF status : Displays the current status of the FBWF (Enabled or Disabled). Boot command : Displays the FBWF command that will be performed at the next boot-up. RAM Used by FBEF : Displays the size of the RAM the FBWF is using. If the current status is set to "Disabled", the used memory is displayed as 0 KB. Threshold : Displays the maximum size of the RAM that the FBWF can use.     FBWF Command  Enable the FBWF and reboot the system : Enables the disabled FBWF and restarts the client. If the client is not restarted, only the boot command is changed to BWF_ENABLE and the current status is not changed. Disable the FBWF and reboot the system : Disables the enabled FBWF and restarts the client. If the client is not restarted, only the boot command is changed to FBWF_DISABLE and the current status is not changed. Commit files : Even if the disks are protected by the FBWF, you can add or delete the files you want to save on them. To write the changes onto the disk, click the [Write the changes to the disk] button.    Session Status  Current session : Displays the volumes being protected by the FBWF and a list of the folders and files on those volumes that are excepted from protection by the FBWF. 2 Using "Windows Embedded Standard 7" (TB-WH) 35 2 Using "Windows Embedded Standard 7" (TBWH)  Next session : Select the volumes that will be protected by the FBWF when the client is booted up next time. Also, select the folders and files that you want to except from protection by the FBWF. Windows Media Player The WES Client includes Windows Media Player 12. With Windows Media Player, you can play audio and video files on a website. 2. 3. 4 Configuring Utilities Local Drive  C Drive The C drive is used for the system. [. . . ] The corresponding shortcut key is [CTRL + ALT + F6]. How to lock the two options Press and hold the shortcut key for a specified time (about 8 seconds). When the lock is on, the options locked will be indicated on the toolbar as shown below.  How to unlock the two options Press and hold the shortcut key for a specified time (about 8 seconds). Note that you are prompted to enter the password in order to unlock the two options. 3 Using the "Zero Client" (TB-CH) 68 4 4. 1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 4. 1. 1 Check the following. Sound issue There is no sound. [. . . ]