User manual SAMSUNG TC240 QUICK GUIDE

[. . . ] · · Remove the stopper pin. Adjust the height of the screen to your specifications. - Caution Avoid lifting the product holding only the stand. - Caution Avoid moving the product only holding it by the camera. Disassembly is in the reverse order of assembly. 1-3 Removing the Stand Before removing the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the screen is facing downwards. Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage, place the monitor down gently and carefully. [. . . ] When using the same IP for both the PC and the Video Conference Monitor, you must connect the LAN cables as shown above. Connect the headphone cable to the headphone port on the product. Connect it only when needed, since this product has an internal speaker. Note that it can only be used for a video call. Connect the microphone cable to the microphone port on the product. Connect it only when needed, since this product has an internal microphone. Note that it can only be used for a video call. Once the connection is finished, turn on the power and press the [ /SOURCE] button to select <VC> as the input signal. Installing the Product 1-6 Ferrite Core · · The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug. 1-6 Installing the Product 1-7 Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information. You must purchase the Kensington Lock separately. A B To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as a desk or chair. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. Insert the locking device into the Kensington slot on the Monitor ( ). Lock the lock ( · · These are general instructions. For exact instructions, see the User Manual supplied with the locking device. You can purchase the locking device from an electronics store, an online shop, or our service center. Installing the Product 1-7 1-8 Product Operating Buttons Product Information You can use your monitor as a standard monitor or as a Video Call monitor. The Video Call functions are built into the monitor. Some functions may not operate when using the product as a monitor, since they are designed only for the video call function. ITEM Camera Microphone Remote control sensor Speaker DESCRIPTION Receives and transmits images during a video call. Receives signals from the remote control. Outputs sound from the remote party during a video call. Outputs sound from the PC when the product is connected to a PC by an audio cable. Product Operating Buttons The buttons are located on the bottom of the monitor. [. . . ] I HEAR A "BEEP, BEEP" SOUND WHEN BOOTING THE COMPUTER. If you hear three or more beeps in succession when booting up the computer, your computer requires service. 2-2 Troubleshooting 2-3 FAQ FAQ How can I change the frequency (refresh rate) of the video signal? PLEASE TRY THE FOLLOWING You have to change the frequency of the graphics card. Windows XP : Change the frequency by selecting Control Panel Appearance and Themes Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. Windows ME/2000 : Change the frequency by selecting Control Panel Display Settings Advanced Monitor, and then change the refresh rate under Monitor Settings. For more information, refer to the User Manual of the computer or the graphics card. [. . . ]