User manual SAMSUNG TL110

[. . . ] Instructions Use this camera in the following order. Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p. 21) Getting to Know your camera Thank you for buying a Samsung Digital Camera. [. . . ] Press the OK button again to resume the recording. If you wish to stop recording, press the shutter button again. A distance of 25cm between you and the camera (microphone) Record Exit If the camera power is turned off while the voice recording is The zoom sound may be recorded if you use the zoom while recording a video. paused, the voice recording is cancelled. is the best distance to record sound. [Voice recording mode] 53 Shooting ( ) Setting movie recording You can set the desired voice recording mode in Movie mode. Off Recording the movie clip without voice You can record the movie without voice. Select [Off] of [Voice] menu in the Movie clip mode. ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. Back Move - [Voice] sub menus [Off] : Record a video without sound. [Zoom Mute] : Record a video without sound while zooming. On Back Move 54 Smart mode Smart mode Smart mode allows users to take a photo simply, without setting any of the more complex functions available. Even beginners can easily learn how to operate it. Smart mode display The LCD monitor displays information about the current Smart mode setting. [Smart Auto mode] [Smart Movie Clip mode] You can use the Smart button at the top of the camera to start Smart mode. [Image & Full Status] 55 Smart mode display No. 1 Description Recording mode Number of available shots remaining Remaining time 3 4 5 6 7 8 9 10 11 12 Memory card icon / Internal memory icon Battery Photo Size / Movie Size Frame rate Flash Self-timer Date / Time Optical Zoom bar Auto Focus Frame OIS [Frame Rate] is enabled only in [Smart Movie] mode. 2010/01/01 01:00 PM 00001 00:00:00 p. 15 p. 40 p. 40 p. 35 p. 36 p. 62 p. 30 p. 47 p. 52 Icons Page p. 55 Starting Smart mode Selecting modes Mode selection using the Smart button You can use the Smart button at the top of your camera to select the correct smart mode. 2 p. 17 [Program mode] [Smart Auto mode] [Movie Clip mode] [Smart Movie Clip mode] 56 Starting Smart mode How to use Smart Auto mode ( ) How to use Smart Movie Clip mode ( ) The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. Select Smart Auto mode by pressing the MODE or Smart button 2. The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen. Press the Shutter button to capture an image. This mode allows users to record a movie clip simply, without setting any of the more complex functions available. Use the Smart button to select Smart Movie Clip mode. Point the camera towards the subject and compose the image by using the LCD monitor. Press the shutter button once and movie clips are recorded for as long as the available recording time allows. Movie clips will still be recorded if the shutter button is released. If you wish to stop recording, press the shutter button again. Each scene is recognized in the following conditions; [Landscape] [Sunset Sky] [Blue Sky] [Natural Green] ( ( ( ( ) : When shooting outdoor scenes ) : When shooting sunset ) : When shooting blue sky ) : When shooting nature such as forest and leaves 57 Sound menu In this mode, you can set up sound settings. [. . . ] The camera is connected to the USB port located on the front of the computer. When the camera is connected to the USB port located on the front of the computer, the computer may not recognize the camera. Connect the camera to the USB port located on the back of the computer. Case 2 Case 7 Case 3 Case 4 Case 8 Case 5 105 FAQ When the movie clip doesn't play back on the PC When the movie clip recorded by the camera doesn't play back on the PC, the causes are mostly due to the codec installed on the PC. When the DirectX 9. 0c or later is not installed Install the DirectX 9. 0c or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ DirectX] folder and click the DXSETUP. exe file. [. . . ]