User manual SAMSUNG TS-H352A

[. . . ] - It can damage the drive or cause it to malfunction. Do not move the drive while in operation and do not attempt to open the disc tray byforce. Make sure to close all working programs before attempting to open the tray and always usethe open/close button. - Do not insert a pin into the emergency opening while in operation. Do not use cracked, distorted or damaged discs. - In particular, a disc with a crack on the inner tracks may break while in use. Safety Precaution Connecting the Cables Other Never allow food particles or foreign substances to enter the drive casing. To protect against the risk of fire, do ot spill such liquids as alcohol and benzene on the drive. Do not disassemble, attempt to repair or modify the device without express approval as directed in the manual. [. . . ] Double-click on the My Computer icon on your desktop. Double-click on the Control Panel folder. The Installing the Device Driver device name is displayed. Setup Connecting the Cables Setting Up the Device Driver The device driver is located in the Ddriver folder of the User's Guide disc with is provided in the package. This device driver is to recognize a DVD-ROM drive on Dos mode. This driver should be applied for DOS mode user to install on Windows 98 or Windows ME only. Automatic Setup Insert the User's Guide disc into the CD-ROM drive and open the Ddriver folder. Run the CDSETUP. EXE file in the Ddriver folder. When Setup is successfully completed, click OK button or press the Enter key. Reboot the computer. Manual Setup Make the C:\SAMSUNG directory. Copy the files from the User's Guide disc to the C:\SAMSUNG directory. * C:\SAMSUNG after the C:\prompt and press [Enter]. Add the DEVICE=C:\SAMSUNG\SSCDROM. SYS \D:SSCD000/V entry. Edit the AUTOEXEC. BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. Reboot the computer. Using the Drive Connecting the Cables Using the DVD-ROM Drive To play audio or video CDs and / or DVDs in your DVD-ROM drive, proceed as follows. Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. Insert the disc (CD/DVD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. Accessories The type of accessories varies depending on product model. Audio cable. User Manual & Setup Guide. Software. Screws. Playing Video CDs Set up and run the SOFT MPEG program. Using the Drive Connecting the Cables Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. Do not place a disc in direct sunlight. Store a disc vertically in a well-ventilated and stable location. Do not write or attach a label on a disc. Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Do not leave the disc compartment open when you are not using it. Using the Drive Connecting the Cables Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: http://samsung-ODD. com Http://samsung. com Using the Drive Connecting the Cables System Requirements Before you install the DVD-ROM drive, we strongly recommend that you check that your setup meets the system requirements listed below. Item Computer Disk space Windows version Description Intel Pentium II (or higher), 128 MB of RAM (or higher) with an IDE interface 100 MB minimum Windows 98 / 2000 / ME / XP Windows (or higher) DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). [. . . ] No sound is heard from an audio CD. A CD is not read or is read too slowly. The disc compartment will not open. Check whether the CD is of good quality and clean it, if necessary. Check that the power cable is correctly connected. Insert a pin or unfolded paper clip in the emergency hole and push firmly until the disc compartment opens. When the MPEG software plays a Video CD, the pictures are not regular and the running speed is too slow. [. . . ]