User manual SAMSUNG TS-H352C

[. . . ] - It can damage the drive or cause it to malfunction. Do not move the drive while in operation and do not attempt to open the disc tray byforce. Make sure to close all working programs before attempting to open the tray and always usethe open/close button. - Do not insert a pin into the emergency opening while in operation. Do not use cracked, distorted or damaged discs. - In particular, a disc with a crack on the inner tracks may break while in use. Safety Precaution Connecting the Cables Other Never allow food particles or foreign substances to enter the drive casing. To protect against the risk of fire, do ot spill such liquids as alcohol and benzene on the drive. Do not disassemble, attempt to repair or modify the device without express approval as directed in the manual. [. . . ] (For recording, it is recommend not to install the Device Driver designed for DOS mode) The Device Driver for DOS mode is included in the Ddriver or DOS Driver folder of the disc enclosed with the product that you purchased. For Windows98/2000/ME/XP or higher version that uses a device driver provided by Windows, there is no need to set up an extra device driver. Refer to the steps below to see if Windows detects the drive. Double-click on the My Computer icon on your desktop. Double-click on the Control Panel folder. The Installing the Device Driver device name is displayed. Setup Setting Up the Device Driver The device driver is located in the Ddriver folder of the User's Guide disc with is provided in the package. This device driver is to recognize a DVD-ROM drive on Dos mode. This driver should be applied for DOS mode user to install on Windows 98 or Windows ME only. Automatic Setup Insert the User's Guide disc into the CD-ROM drive and open the Ddriver folder. Run the CDSETUP. EXE file in the Ddriver folder. When Setup is successfully completed, click OK button or press the Enter key. Reboot the computer. Manual Setup Make the C:\SAMSUNG directory. Copy the files from the User's Guide disc to the C:\SAMSUNG directory. * C:\SAMSUNG after the C:\prompt and press [Enter]. Add the DEVICE=C:\SAMSUNG\SSCDROM. SYS \D:SSCD000/V entry. Edit the AUTOEXEC. BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. Reboot the computer. Using the Drive Connecting the Cables Using the DVD-ROM Drive To play audio or video CDs and / or DVDs in your DVD-ROM drive, proceed as follows. Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. Insert the disc (CD/DVD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. Accessories The type of accessories varies depending on product model. User Manual & Setup Guide. Software. Screws. Playing Video CDs Set up and run the SOFT MPEG program. Design and specifications are subject to change without prior notice. Using the Drive Connecting the Cables Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. Do not place a disc in direct sunlight. Store a disc vertically in a well-ventilated and stable location. Do not write or attach a label on a disc. Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. [. . . ] Adjust the volume control of windows. The DVD-ROM drive is not detected by Windows. No sound is heard from an audio CD. A CD is not read or is read too slowly. The disc compartment will not open. Check whether the CD is of good quality and clean it, if necessary. Check that the power cable is correctly connected. [. . . ]