User manual SAMSUNG TX-R3064W

[. . . ] TX-R2764/TX-R3064W TX-R3264/TX-R2765 TX-R3065W/TX-R3265 TX-R2664W COLOR TELEVISION Owner's Instructions Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. [. . . ] Press the EXIT button to exit the menu. Edit Name AV1 AV2 AV3 S-Video COMPONENT1 COMPONENT2 Move Adjust VCR : ---: ---: ---: ---: ---- ^ Return 40 Chapter Four S P E C I A L F E AT U R E S Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optional reception. 1 Press the MENU button to display the menu. Press the or button to select "Channel", then press the ENTER button. Channel Auto program Add/Delete Fine tune Air/CATV Name ^ ^ : : : 00 Air ---- Move Enter Return 2 Press the or button to select "Fine tune". Channel Auto program Add/Delete Fine tune Air/CATV Name ^ ^ ^ : : 00 Air ---- Move Adjust Return 3 Press the or ^ button to adjust the fine tuning. Channel Auto program Add/Delete Fine tune Air/CATV Name ^ ^ ^ : : + 01 Air ---- Move Adjust Return 4 To store the fine tuning setting in the TV's memory, press the button. To reset the fine tuning to "00", press the button. Press the EXIT button to exit the menu. Channel Auto program Add/Delete Fine tune Air/CATV Name ^ ^ + 01* ^ Air ---- After you adjust the fine tuning, "*" will appear when you press INFO while watching this channel. : : Add/Delete Return 41 S P E C I A L F E AT U R E S Changing the Color Tone 1 Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. Picture Mode Custom Color tone Size Digital NR Tilt Move Dynamic ^ ^ : Warm1 : Wide : On : 0 Return Adjust 2 Press the or button to select "Color tone". Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ Warm1 ^ : Wide : On : 0 Return Adjust 3 Press the or ^ button to select "Cool2", "Cool1", "Normal", "Warm1" or "Warm2" according to personal preference. Press the EXIT button to exit the menu. Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ Warm1 ^ : Wide : On : 0 Return Adjust 42 S P E C I A L F E AT U R E S Changing the Screen Size 1 Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. Picture Mode Custom Color tone Size Digital NR Tilt Move Dynamic ^ ^ : Warm1 : Wide : On : 0 Return Adjust 2 Press the or select "Size". button to Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ : Warm1 Wide ^ : On : 0 Return Adjust 3 Press the or ^ button to select "Wide", "Panorama (Depending on the model)", "Zoom1", "Zoom2", or "4:3" (Normal). Press the EXIT button to exit the menu. Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ : Warm1 Wide ^ : On : 0 Return Adjust Alternate method: Simply press the P. SIZE button on the remote control to change a screen size. Wide Sets the picture to 16:9 wide mode. Use this mode for the wide aspect ratio of a panoramic picture. (Option) · Zoom1: Magnifies the size of the picture on screen. You can also move the picture on screen using the or button on the remote control. · Zoom2: Magnifies the size of the picture more than Zoom1. You can also move the picture on screen using the or button on the remote control. · 4:3(Normal): Sets the picture to 4:3 normal mode. Notes: Screen size cannot be changed in the Component (480p, 720p and 1080i) mode. 43 · Wide: · Panorama: S P E C I A L F E AT U R E S Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. Picture Mode Custom Color tone Size Digital NR Tilt Move Dynamic ^ ^ : Warm1 : Wide : On : 0 Return Adjust 2 Press the or button to select "Digital NR". Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ : Warm1 : Wide On ^ : 0 Return Adjust 3 Press the or ^ button to select "On" or "Off". Press the EXIT button to exit the menu. Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ : Warm1 : Wide Off ^ : 0 Return Adjust 44 S P E C I A L F E AT U R E S Tilt Due to the Earth's magnetic field there may be same minor image tilt depending on the TV's location. When this occurs, follow the steps below. 1 Press the MENU button to display the menu. Press the or button to select "Picture", then press the ENTER button. Picture Mode Custom Color tone Size Digital NR Tilt Move Dynamic ^ ^ : Warm1 : Wide : On : 0 Return Adjust 2 Press the or select "Tilt". button to Picture Mode Custom Color tone Size Digital NR Tilt Move : Dynamic ^ : Warm1 : Wide : Off 0 ^ Return Adjust 3 Press the or ^ button to adjust the Tilt. [. . . ] Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button and make sure that the VCR (CABLE or DVD) LED is illuminated. The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a "0". (If more than one code listed, try the first one. ) 5 Press the POWER button on the remote control. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). · When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE and FF) will still operate your VCR (or DVD player). [. . . ]