User manual SAMSUNG TX-R3080W

[. . . ] TX-R3079WH TX-R3080WHX COLOR TELEVISION Owner's Instructions Register your product at www. samsung. com/global/register Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. [. . . ] If there is a difference between the real time and set time, please set the time manually. 5 Press the . . . or button to select "DST" (Daylight Saving Time), then press the ENTER button. or button to select "On" or "Off", then press the ENTER button. Press the EXIT button to exit. TV Clock Mode Clock Set Time Zone DST Clock : Auto : Eastern On : No Off English - 43 O P E R AT I O N Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select "Input". TV Source List Edit Name Input 2 Press the ENTER button to select "Source List". Press the L or M button to select the signal source, then press the ENTER button TV TV Video1 Video2 Video3 Video4 S-Video1 M More Source List :---:---:---:---:---- oe When you connect equipment to the TV you , can choose between the following sets of jacks : Video1, Video2, Video3, S-Video1, Component1, Component2, or HDMI on the TV's rear panel, and Video4 or S-Video2 on the TV's side panel. Alternate method: Press the SOURCE button on the remote control repeatedly to select an external signal source. Video3 English - 44 O P E R AT I O N Assigning Names to External Input Mode 1 Press the MENU button. Press the ENTER button to select "Input". TV Source List Edit Name Input 2 Press the L or M button to select "Edit Name", then press the ENTER button. TV Source List Edit Name Input 3 Press the L or M button to select the signal source to be edited, then press the ENTER button. TV Video1 Video2 Video3 Video4 S-Video1 S-Video2 M Edit Name :---:---:---:---:---:--- More 4 Press the L or M button to select the external device (VCR, DVD, Cable STB, HD STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, PC, D-VHS, PVR STB, TV, VOD STB). Set other signal sources (Video2, Video 3, Video4, S-Video1, S-Video2, Component1, Component2, HDMI) using the same method as listed above. Press the EXIT button to exit. TV Video1 Video2 Video3 Video4 S-Video1 S-Video2 M Edit Name : -- - --- : -VCR -: -DVD -Cable STB :---HD STB : -Satellite STB --: -AV - - Receiver DVD Receiver M More English - 45 P CI C hSaEp A L e E AT U R E S u r t Fr Fo S P E C I A L F E AT U R E S Analog Fine Tuning Analog Channels The Fine Tuning function lets you manually adjust the TV's tuner if you have difficulty tuning channels. 1 Press the MENU button. Press the L or M button to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Add / Delete Favorite Channels Name Fine Tune Signal Strength LNA : On 2 Press the L or M button to select "Fine Tune", then press the ENTER button. Press the oe or button to adjust the fine tuning. To store the fine tuning setting in the TV's memory, press the ENTER button. Air 7 Fine Tune Air 7 Reset Auto Fine Tuned 0 Fine Tune To reset the fine tuning to "0", press the L or M button to select "Reset", then press the ENTER button Press the EXIT button to exit. Manually Fine Tuned 3 Reset Fine Tune Air 7 Auto Fine Tuned 0 Reset · Only analog TV channels can be fine tuned. English - 46 S P E C I A L F E AT U R E S Digital Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 Press the MENU button. Press the L or M button to select "Channel", then press the ENTER button. TV Channel Antenna : Air Auto Program Add / Delete Favorite Channels Name Fine Tune Signal Strength LNA : On 2 Press the L or M button to select "Signal Strength", then press the ENTER button. TV Channel Antenna : Air Auto Program Add / Delete Favorite Channels Name Fine Tune Signal Strength LNA : On If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit. TV Signal Strength OK English - 47 S P E C I A L F E AT U R E S Changing the Screen Size 1 Press the MENU button. Press the L or M button to select "Picture", then press the ENTER button. TV Mode Size Tilt Picture : Dynamic : 16:9 2 Press the L or M button to select "Size", then press the ENTER button. Press the oe or button to select the screen formats you want. Press the EXIT button to exit. TV Size oe Changing the Screen Format feature availability depends on the current broadcasting signal format. Zoom2 4:3 16:9 Panorama Zoom1 oe Only "16:9" and "4:3" modes are available in DTV mode. Alternate method: Press the P. SIZE button on the remote control repeatedly to select one of the screen formats you want. Viewing with a 4:3 signal (When a 4:3 signal is received) 16:9 Panorama Zoom1 4:3 Zoom2 Viewing with a 16:9 signal (When a 16:9 signal is received) The illustrations below show the change of a picture while viewing a DVD title. 16:9 Panorama Zoom1 4:3 Zoom2 English - 48 S P E C I A L F E AT U R E S Tilt Due to the Earth's magnetic field there may be some minor image tilt depending on the TV's location. When this occurs, follow the steps below. 1 Press the MENU button. Press the L or M button to select "Picture", then press the ENTER button. TV Mode Size Tilt Picture : Dynamic : 16:9 2 Press the L or M button to select "Tilt", then press the ENTER button. [. . . ] In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and set-top box. · The remote control might not be compatible with all VCRs, DVD players, Cable box, and set-top box. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. oe The remote control has five modes: TV, STB, VCR, CABLE, and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). oe Make sure you enter 3 digits of the code, even if the first digit is a "0". (If more than one code listed, try the first one. ) 5 Press the POWER button on the remote control. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. oe If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). · When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate your VCR (or DVD player). [. . . ]