User manual SAMSUNG TX-T2042

[. . . ] COLOR TELEVISION TX-T2041X/TX-T2042X Connection Panel (depending on the model) The product color and shape may vary depending on the model. Rear Jack Side Jack Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register. __________ 1 4 2 3 3 2 Video input 3 Headphone jack 1 Audio input Whenever you connect an audio or video system to your Control Panel (depending on the model) The product color and shape may vary depending on the model. [. . . ] Reset Adjust the fine tuning by pressing Move the or button. Adjust Return To store the fine tuning setting in the TV's memory, press the MENU button. To reset the fine tuning to "0", select "Reset" by pressing the or button, then press the ENTER button. Setup - Time Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button. ) Time Clock -- : -- am Sleep Timer : Off On Timer -- : -- am Off Off Timer -- : -- am Off On Timer Channel : 3 On Timer Volume : 10 Move Enter Return Setup - Caption Your TV decodes and displays Caption Caption : On the closed captions that are Mode : Caption broadcast with certain TV shows. Channel :1 Field :1 These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed Move Enter Return caption signal from TV programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your TV schedule and on the tape's packaging: C C . Caption: On/Off You can activate or deactivate the "Caption" function. Mode - In "Caption" mode, captions appear at the bottom of the screen, and they usually cover only a small portion of the picture. - In "Text" mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. Channel / Field Depending on the particular broadcast, it might be necessary to make changes to "Channel" and "Field". Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish. ) Sleep Timer You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from "30 Min. " to "180 Min. "). Channel - Name Use this feature to assign an easy-to-remember label to any channel (i. e. , "CBS", "ESPN", "PBS2", "CNN1", etc. ). A label consists of four fields, where each field is a letter (A~Z), a number (0~9), a blank, or -. When the INFO button is pressed, the channel label will appear next to the channel number. Name More 2 3 4 5 6 More Move : : : : : A ------------Return On Timer / Off Timer You can set the On/Off timers so that the TV will switch on or off automatically at the time you select. You must set the clock first. On Timer Channel The preferred channel can be set for when the timer automatically turns on the TV. On Timer Volume The preferred volume can be set for when the timer automatically turns on the TV. Adjust Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating or leakages, which may occur if a TV is on for too long. Misspellings and unusual characters sometimes occur during closed caption transmissions, especially those of live events. [. . . ] If you make any changes to these settings, the sound mode is automatically switched to "Custom". MTS (Multi-channel Television Sound) Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP. Press the MTS button on the remote control repeatedly to select "Stereo", "Mono", or "SAP" (Secondary Audio Program). No color, wrong colors or tints. Make sure the program is broadcast in color. If you are using a VCR, check the tracking. [. . . ]