User manual SAMSUNG TX-M1967 INTRODUCTION (VER.1.0)

[. . . ] TXM1967 TXM1367 TXM1997 COLOR TELEVISION . . . . . . . . . . . . . Owner's Instructions Printed in Mexico AA68-02340A (ENG) Warning!Important Safety Instructions CAUTION RISKOFELECTRICSHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] When Closed Caption has been set, the icon( ) will appear by pressing the Display button. 3. 1 CHAPTER THREE: TV OPERATION O P E R AT I O N Selecting a Menu Language 1 Press MENU to display the menu. Press CH w three times to select "Function", then press the VOL + button. 2 Press VOL + to select the appropriate language: English, Spanish, or French. 3 Press MENU twice to exit. CHAPTER THREE: TV OPERATION 3. 2 O P E R AT I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH v and CH w buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or a cable system). 1 Press MENU to display the menu. Press CH w two times to select "Channel", then press the VOL + button. 2 Repeatedly press VOL + to cycle through these choices: ANT (antenna) STD, HRC or IRC (all cable TV). Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory" (next page). 3 Press MENU twice to exit. 3. 3 CHAPTER THREE: TV OPERATION O P E R AT I O N Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (ANT, STD, HRC, IRC). Press the MENU button, then press the CH w button twice to select "Channel, " then press the VOL + button. 2 Press the CH w button to select "Auto program". 3 Press the VOL + button. The TV will begin memorizing all of the available channels. The TV automatically cycles through all of the available channels and stores them in memory. Press the MENU button at any time to interrupt the memorization process and return to the Channel menu. 4 After all the available channels are stored, the Auto program menu reappears. Press the MENU button twice to exit. CHAPTER THREE: TV OPERATION 3. 4 O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the MENU button. Press the CH w button twice to select "Channel", then press the VOL+ button. 2 Press the CH v or CH w button to select "Add/Erase". Press the VOL+ button. 3 Press the VOL-/+ or number buttons to select the channel you want to add or erase. 4 Press the CH v or CH w button to select "Select". Press the VOL+ or VOLbutton to select "Added" or "Erased". Press the MENU button three times to exit. 3. 5 CHAPTER THREE: TV OPERATION O P E R AT I O N Changing Channels Using the Channel Buttons 1 Press the CH v or CH w button to change channels. When you press CH v or CH w, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels. ) You will not see channels that were either erased or not memorized. Directly Accessing Channels Use the number buttons to quickly tune to any channel. 1 Press the number buttons to go directly to a channel. For example, to select channel 27, press "2, " then "7. " The TV will change channels when you press the second number. When you use the number buttons, you can directly select channels that were either erased or not memorized. To select a channel over 100, press the +100 button. (For channel 122, press "+100, " then "2, " then "2. ") To change to single-digit channels (0­9) faster, press "0" before the single digit. [. . . ] Note: The V-Chip will automatically block any category that is "more restrictive. " For example, if you block the "PG-13" category, then "R, " "NC-17, " and "X" will automatically be blocked also. How to Reset the TV after the V-Chip Blocks a Channel ("Emergency Escape") If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: "Excessive rating. " To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an "emergency escape": Press the MENU button to display the menu. [. . . ]