User manual SAMSUNG TXM3298HF

[. . . ] TXM3297HF / TXM3097WHF TXM2797HF / TXM2796HF TXM3296HF / TXM3298HF TXM3098WHF / TXM2798HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COLOR TELEVISION Samsung Electronics America inc. 105 Challenger Road, Ridgefield Park, N. J. 07660 SERVICE DIVISION TEL: 1-800-SAMSUNG (1-800-726-7864) www. samsungsupport. com . . . . . . . . . . . . . Owner's Instructions AA68-02395A(ENG) Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] (For channel "4, " press "0, " then "4. ") Using the PRE-CH Button to select the Previous Channel 1 Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them. w Adjusting the Volume Press VOL + or ­ VOL to increase or decrease the volume. Using Mute At any time, you can temporarily cut off the sound using the Mute button. 1 Press MUTE and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen. 2 To turn mute off, press MUTE again, or simply press either the VOL ­ or VOL + button. CHAPTER THREE: TV OPERATION 3. 8 O P E R AT I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i. e. , "CBS", "ESPN", "PBS2", CNN1", etc. ) A label consists of four fields, where each field is a letter, a number, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. 1 Press the CH v or CH w button to tune to the channel that will be labeled. 2 Press the MENU button to display the menu, then press the CH w button to select "Channel". Press the VOL + button. Note: You cannot select "Labeling" in the A/V mode. w 3 Press the CH w button to select "Labeling". Press the VOL + button to begin labeling. The left-most field will be highlighted. See top paragraph. ) 4 Press the CH v or CH w button to select a letter, a number, "*", or a blank. (Pressing the CH v button results in this sequence: A, B, . . . Z, *, blank, 0, 1, . . . 9). 5 Press the VOL+ button to switch to the next field, which will be highlighted. Select a second letter or digit using the CH v and CH w buttons, as above. Repeat the process to select the last two digits. Press the MENU button to set the label and clear the menus from the screen. 3. 9 CHAPTER THREE: TV OPERATION O P E R AT I O N Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the DISPLAY button. ) Option 1: Setting the Clock Manually 1 Press the MENU button to display the menu. Press the CH w button to select "Function", then press the VOL + button. 2 Press the CH w button to select "Time" menu. Press the VOL + button: The Time menu will appear on the screen, and "Clock" will be highlighted. 3 Press the VOL + button again (the hours digits will be highlighted). Press the CH v or CH w button repeatedly until the correct hour appears. When selecting the hours, be sure to select the proper time of day (AM or PM). w w You can change the hours by pressing the CH v or CH w button repeatedly (or by holding down either of these buttons). 4 After the hour is entered, Press the VOL + button. (at this point the minutes digits will be highlighted). Press the CH v or CH w button to select the correct minutes. After selecting the correct minutes, press the VOL + button. Press the MENU button to exit. The time will appear every time you press the DISPLAY button. CHAPTER THREE: TV OPERATION 3. 10 O P E R AT I O N Option 2: Using the Local PBS Channel to Automatically Set the TV Clock 1 Press the MENU button to display the menu. [. . . ] In this case, use the V-Chip function for an "emergency escape": Press the MENU button to display the menu. Press the CH w button to select the "Function" menu and press the VOL + button. Press the CH w button to select the "V-chip" menu and press the VOL + button. Enter your PIN number, and press the VOL + button to temporarily disable the V-Chip Lock. CHAPTER FOUR: SPECIAL FEATURES 4. 26 S P E C I A L F E AT U R E S Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the in built demonstration. 1 Press the MENU button to display the menu. [. . . ]