User manual SAMSUNG U70

[. . . ] SyncMaster U70 LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. [. . . ] Select the monitor for which you want to configure the display settings. You can configure the "Screen Resolution" , "Color Quality" and "Screen Rotation" settings for your monitor. Checking the configuration After the installation, you can check the configuration by following these steps. Right-click "My Computer", and select "Properties" - "System Properties" - the "Hardware tab". 2. Click "Device Manager". Using the Software 3. A list of the installed device will be displayed, as shown in the figure below. - The Initial Screen Settings after Installing the Program · · · Applicable mode: Extend mode Mode position: To the right of the primary screen Mode rotation: 0° Restrictions on the 7" USB Monitor Supported OS (Operating Systems) · Windows XP - Service Pack 1 or earlier: Unsupported - Service Pack 2 or later: Supported · Windows 2000 - Service Pack 3 or earlier: Not Supported - Service Pack 4 or later: Supported · Windows Server 2003: Not Supported Using the Software · Windows Vista: Supported. To check the information on the operating system of your PC, right-click "My Computer" on the "Windows Desktop" and select "Properties" from the displayed menu. Check the information in the "General" tab of the "Computer Properties" window. Because this USB monitor is recognized as a USB device, the DOS screen that appears for general monitors when a PC is booting up is not displayed. You cannot use the USB monitor for software using 3D hardware acceleration. - Real Player (Expansion mode is not supported. ) - For most 3D games - Programs running on the base of Direct X 3. Supported movie programs - Power DVD - Win DVD(Version 5 onwards) - Windows Media Player (Version 10 or later is supported. ) - VLC 4. This monitor does not support the MagicTune program. - The MagicRotation function may not function normally. - If the MagicTune program is installed on your PC, it may not be compatible with this monitor. The USB monitor may not work normally with USB 1. 0. If the graphics card of your PC does not support WDDM, the extended mode may not be available in Windows Vista. Example) Some versions of the Matrox Card Troubleshooting Check List Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. There is no image on the screen. I cannot turn on the monitor. Q: A: Check whether the USB cable is connected correctly. Check whether the USB driver is installed. The USB monitor is recognized as a general USB device on a PC. If you turn the monitor on or off quickly and repeatedly, a USB device problem may occur. Refer to the USB device Troubleshooting section on the Microsoft customer support website. Right-click the "My Computer" and click on "Properties" The Device Manager is displayed. From the "Action" menu, click "Scan for hardware changes". [. . . ] This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. Please follow the suggestions below to protect your LCD from image retention. Power Off, Screen Saver, or Power Save Mode Ex) · Turn the power off when using a stationary pattern. [. . . ]