User manual SAMSUNG UE22K5000

[. . . ] ❑ Using the INFO button (Now & Next guide) The display identifies the current channel and the status of certain audio-video settings. The Now & Next guide shows daily TV programme information for each channel according to the broadcasting time. NN When you press the INFO button, a channel information banner will appear on the top of the screen. And then press the ENTERE button, you can see the details of the programme. [. . . ] NN Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. — ■■ Reset Sound OO MENUm → Sound → Reset Sound → ENTERE Reset all sound settings to the factory defaults. – English ❑❑ Selecting the Sound Mode t When you set to Dual I-II, the current sound mode is displayed on the screen. Audio Type Mono A2 Stereo Stereo Dual Mono Dual I-II Mono Stereo ↔ Mono Dual I ↔ Dual II Mono Mono ↔ Stereo Mono → Dual I  Dual II  Default Automatic change Dual I Automatic change Dual I ◀ NICAM Stereo Stereo Dual ▶ NN If the stereo signal is weak and an automatic switching, occurs, then switch to the mono. English ❑❑ Executing initial setup ■■ Setup OO MENUm → System → Setup → ENTERE Configure the channels and the time when setting up the TV for the first time or when resetting the unit. NN Execute the initial setup following instructions that the TV guides. — ▶ English ❑❑ Setting the Time ■■ Time OO MENUm → System → Time → ENTERE The current time will appear every time you press the INFO button. —● Clock: Setting the clock is for using various timer features of the TV. NN If you disconnect the power cord, you have to set the clock again. — Clock Mode: Set up the current time manually or automatically. €– Auto: Set the current time automatically using the time from a digital ▶ English NN The aerial must be connected in order to set the time automatically. €– Manual: Set the current time manually. NN Depending on the broadcast station and signal, the auto time set up may not be correct. NN You can set the Date and Time directly by pressing the number buttons on the remote control. Time Zone (Depending on the country): Select your time zone. NN This function is only available when the Clock Mode is set to Auto. nN When selecting Manual in Time Zone , GMT and DST will be activated. — ▶ English Time Offset (Depending on the country): Adjusts the time when your TV receives the time information via Internet. Set the right time by selecting an offset. NN The current time will be set through a network, if the TV fails to receive the time information including the broadcast signal from TV stations. [. . . ] NN When software is upgraded, video and audio settings you have made will ◀ return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. – English ●● Update now The TV's firmware can be updated through either USB connection or broadcast signal. €– By USB: Insert a USB drive containing the firmware upgrade file, downloaded from “www. [. . . ]