User manual SAMSUNG UE46B7070WW

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4 AAC) cableTV service. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. [. . . ] The procedures to use the content are the same as those for Media Play (uSB & DLNA). N If you install the PC share manager programme supplied with the TV onto a PC, you can have the PC perform the role of a DLNA server over the network. N DLNA does not support the following functions. The REW/FF (/) key functions while a movie is playing. playing Movie Continuously (Resume Play) function. N The Skip function may not work with some container such as asf and mkv. n The Divx DRM , Multi-audio , embedded caption does not supported. N Samsung PC Share manager should be permitted by the firewall programme on your PC. N The Skip (/ keys) or Pause function may not work while a movie is playing for the DLNA of other manufacturers, depending on the corresponding content information. N The playing time may not be displayed while a movie is playing. Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV's remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. N Connect the Optical cable between the DIgITAL AuDIo ouT (oPTICAL) jack on your TV and the Digital Audio Input on the Home Theatre. N When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home Theatre's Front Left and Right speakers and the subwoofer. N You can connect an Anynet+ device using the HDMI 1. Some HDMI cables may not support Anynet+ functions. Anynet+ (HDMI-CEC)Off/On To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to on. AutoTurnOffNo/Yes Setting an Anynet+ Device to turn Off automatically when the TV is turned Off. N The active source on the TV remote must be set to TV to use the Anynet+ function. [. . . ] N När en PC med en upplösning på 1920 x 1080@60Hz är ansluten till porten HDMi in 1(DVi) ska du ställa in läget HDMi1/DVi till DVi PC i ändra namn i läget ingångar. Hoppar till föregående grupp/hoppar till nästa grupp. Detta eliminerar behovet av att kopiera dem till en USB-lagringsenhet och sedan ansluta enheten till din TV. Media Play gör det möjligt att spela upp innehåll som finns sparas på en USB-enhet som är ansluten till TV:n, medan DLNA gör det möjligt att spela upp innehåll som finns sparat på en DLNA-server (din dator) som är ansluten till din TV eller över nätverket. [. . . ]