User manual SAMSUNG UE55C8000XW 55 3D LED TV 2010-ES MODEL

[. . . ] So, they cannot be workable at this moment. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and conditions of their business. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service providers. [. . . ] Changes to the shared folders are not applied to your PC until you select the Set Changed State menu. Setting the Access Permission To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. You can change the access permissions by using the Allow Accept / Deny button. Server You can run or stop using your PC as a server. Run DLNA Digital Media Server when Windows Starts You can determine whether to start the PC server automatically when Windows starts. change server name You can rename the PC server. The new name will appear at the top right of the window and will appear on the TV. DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Media Play enables playing content saved on a USB memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for Media Play (uSB & DLNA). N If you install the PC share manager programme supplied with the TV onto a PC, you can have the PC perform the role of a DLNA server over the network. N If you cannot find a device you want, press the red button to scan for devices. You cannot cancel the operation during the switching operation. n The time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed. N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. press the red button to search for the connected device. N If you have selected external input mode by pressing the SourCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. Shows the play menu of the connected device. Starts recording immediately using the recorder. (This is only available for devices that support the recording function. [. . . ] i så fall ska du fråga Internetleverantören om metoderna för att ansluta andra enheter än din dator (exempelvis din TV) till Internet. Om Internetleverantören kräver ett ID eller lösenord för att ansluta till Internet (nätverk) kanske din TV inte kan ansluta till Internet. Om Internetleverantören har registrerat MAC-adress för enheten som används för att ansluta till Internet första gången och autentiserar MAC-adressen varje gång du ansluter till Internet, kanske din TV inte kan ansluta till Internet eftersom MAC-adressen varierar från enhetens (PC). None Security kan ansluta till AP direkt utan att använda WPC-funktion. [. . . ]