User manual SAMSUNG UE55JS9000

[. . . ] E-MANUAL Thank you for purchasing this Samsung product. Face the TV camera, raise your hand to a comfortable position, and then move your index finger to the left or right slowly with it fully extended upwards. Move your hand left or right slowly to move the pointer to a function. Curl your index finger down to select a function, and then raise it again to run the selected function. "" This function is only available on certain models in specific geographical areas. [. . . ] "" This function is only available for analogue broadcasts. Transferring channel list (MENU/123) MENU Broadcasting Channel Settings Transfer Channel List You can import or export the channel list to a USB storage. ●● Import from USB: Imports channel list from a USB storage. ●● Export to USB: Exports channel list saved in the TV to a USB storage. "" This function is available when USB is connected. Deleting CAM operator profile (MENU/123) MENU Broadcasting Channel Settings Delete CAM Operator Profile You can delete the CAM operator. "" This function is only available on certain models in specific geographical areas. Setting satellite system (MENU/123) MENU Broadcasting Channel Settings Satellite System You can configure a set of satellite dish settings before performing a channel scan. "" This function is only available on certain models in specific geographical areas. Changing teletext language (MENU/123) MENU Broadcasting Channel Settings Teletext Language You can set or change the teletext language. To watch the teletext broadcast in your preferred language, select a language to use in Primary teletext. If this language is not supported, you can watch the teletext broadcast in your secondary preferred language set in Secondary teletext. "" This function is only available on certain models in specific geographical areas. Showing common interface menu (MENU/123) ●● CI Menu MENU Broadcasting Common Interface You can view information about common interfaces. Enables the user to select from the CAM-provided menu. Select the CI menu based on the menu PC Card. ●● CAM video transcoding Configures the setting to transcode the video codec from the CAM automatically. Turn it Off if you do not want to use it. "" You must use a CAM that supports video codec transcoding. ●● Application Info Displays information about the CAM inserted into the CI slot and about the “CI or CI+ CARD” inserted into the CAM. You can install the CAM any time, with or without the TV turned on. ●● CICAM PIN Manager Manages Common Interface Common Access Module (CICAM) PIN. Save PIN or change stored PIN and then set other PIN options. Adjusting the Picture Quality Choosing a picture mode (MENU/123) ●● Dynamic MENU Picture Picture Mode Try Now You can select the picture mode that provides the best viewing experience. Makes the picture clearer when the ambient lighting is so bright that it makes the picture difficult to see. ●● Standard Is the default mode suitable for most environments. ●● Natural Reduces eye strain. ●● Movie Darkens the screen, reduces glare, and relieves eye fatigue. Use this mode while viewing the TV in a darkened room or watching a movie. ●● Entertain Sharpens images for a more dynamic viewing experience. ●● Stadium MENU System Sports Mode) to On, Picture When you turn Sports Mode ((MENU/123) Mode is set to Stadium automatically to configure the picture settings suitable to sports events. "" When the Input source is set to PC, Standard and Entertain modes are only available. "" When a PC is connected to the TV, but the Entertain mode is not available, set Edit Device Type to DVI PC or PC. Adjusting the picture quality (MENU/123) MENU Picture You can adjust the following picture quality settings manually for each combination of an input source and picture mode. ●● Backlight Try Now Adjusts the brightness of individual pixels. Decrease this brightness to reduce power consumption. ●● Contrast Try Now Adjusts the screen contrast. ●● Brightness Try Now Adjusts the overall brightness. ●● Sharpness Try Now Sharpens or dulls the edges of objects. ●● Colour Try Now Adjusts the overall colour saturation. ●● Tint (G/R) Try Now Adjusts the ratio of green to red. Increase the green value to saturate the greens and the red value to saturate the reds. "" The TV saves the adjusted values for the current input source and picture mode and applies these values each time you select the same input source and picture mode. "" The Colour and Tint (G/R) settings cannot be adjusted when the TV is connected to a computer via an HDMI-to-DVI cable. Applying the current picture settings to other input sources (MENU/123) MENU Picture Apply Picture Mode Try Now You can apply the picture quality settings to the current source and other input sources. ●● All Sources Applies the settings to all external devices connected to the TV. ●● Current Source Applies the settings to the current source only. Adjusting advanced settings (MENU/123) MENU Picture Advanced Settings Try Now You can fine-tune how images are displayed on the TV screen for the Standard and Movie picture modes. ●● Dynamic Contrast Try Now Automatically adjusts the screen contrast for an optimal contrast setting. ●● Black Tone Try Now Adjusts the black colour depth. ●● Flesh Tone Try Now Darkens or lightens skin tones. ●● RGB Only Mode Try Now Adjusts the red, green, and blue levels individually. ●● Colour Space Try Now Adjusts the range of colour that can be displayed on the screen. –– Auto: Automatically adjusts the colour space to match the input signal. –– Native: Applies a range of colours that is wider than the input signal. –– Custom: Allows you to adjust the colour space manually. Select a colour, and then change its Red, Green, and Blue saturations. Reset allows you to restore the default values for Colour Space. [. . . ] Licence: The Rovi Guide system is manufactured under licence from Rovi Corporation and/or its subsidiaries. Patent: The Rovi Guide system is protected by patents and patent applications filed in the US, Europe, and other countries including one or more of the United States patents 6, 396, 546; 5, 940, 073; 6, 239, 794 issued to Rovi Corporation and/or its subsidiaries. Disclaimer: Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the programme schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the programme schedule information or other data in the Rovi Guide system. [. . . ]