User manual SAMSUNG UE65F6400AK

[. . . ] ●● Press the E-MANUAL button on the regular remote control. ●● Press the MORE button on the Smart Touch Control to display control buttons on the screen. Flick the Touchpad until e-Manual appears and select it. "" Words in blue refer to screen menu options and words in light blue refer to remote control buttons. "" A printable version of this guide is also available at www. samsung. com/support. Scrolling a Page To scroll a page, use of one of the following methods: ●● Press the or button on the scroll bar at the right edge of the screen. ●● Drag or flick up or down the line on either the left or right edge of the touchpad. [. . . ] Try Now ●● MPEG Noise Filter Reduces MPEG noise and improves the video quality. Try Now ●● HDMI Black Level This is available only for video input via an HDMI cable. Use this to reduce image retention that may occur when watching video from an external device. Try Now ●● Film Mode Optimizes the picture quality for movies. This feature is only available when watching TV or when the input signal is AV, Component (480i, 1080i), or HDMI (1080i). Try Now ●● Motion Plus Removes blurring and judders from scenes with rapid movement. If you select Custom, you can configure the after image and screen trembling removal ratio and you can view a sharper image through the Clear motion function. Try Now "" The Info screen on your TV displays the resolution and frequency of the incoming signal (60Hz), but not the frequency the TV is generating for the image it is displaying by using Motion Plus function. set up the Blur Reduction, Judder Reduction, Clear motion and Reset manually. "" If noise occurs on the screen, please set up the Motion Plus to Off. If Motion Plus is Custom, you can –– Blur Reduction: Adjusts the blur reduction level from video sources. –– Judder Reduction: Adjusts the judder reduction level from video sources when playing films. This function is only available when you add a custom sound mode in the Custom Sound Profile. Speaker Settings If the TV's audio is sent to an external device such as a home theatre system, you can designate which speakers to use and make adjustments to eliminate decoding speed echoes. Speaker Select Screen Menu > Sound > Speaker Settings > Speaker Select Try Now Sound Sound Mode Sound Effect 3D Audio Speaker Settings Additional Settings Sound Customiser Reset Sound Low Standard "" The displayed image may differ depending on the model. You can choose which speakers to use from among available several speakers. To use both the TV speakers and the AV receiver speakers simultaneously, set this option to TV Speaker. If there is a delay between the two sounds, choose any other than TV Speaker to mute the TV speakers. "" Using the external speakers only disables the volume button and the mute function. In addition, certain Sound options will be disabled. Additional Settings Screen Menu > Sound > Additional Settings Try Now Configure additional settings for optimum audio output. TV Audio through the Samsung Multi View 3D Glasses Screen Menu > Sound > Speaker Settings > Samsung 3D Glasses Earphone Try Now It's possible to listen to the TV's audio via the earphones on Samsung Multi View 3D Glasses connected to the TV. Verify that Samsung Multi View 3D Glasses have been paired to the TV and then that Samsung 3D Glasses Earphone is set to On. Restrictions ●● Setting Samsung 3D Glasses Earphone to On will disable certain Sound menu options. ●● It is not possible to adjust the TV speaker volume using the remote control or the buttons on the TV. ●● TV audio via the earphones is available only when 3D or Samsung Multi View feature is enabled. If Samsung Multi View has been set to Multi Screen View, the Samsung 3D Glasses Earphone option will not be available. ●● When Samsung Multi View has been set to Multi Screen View, TV audio will only be available through the earphones. TV audio will not be available through the TV's speakers or external speakers. DTV Audio Level Screen Menu > Sound > Additional Settings > DTV Audio Level Try Now (Digital channels only) The TV cannot freely control the volume of the digital audio that it sends to the AV receiver. Use this to set the digital audio volume at a comfortable level. "" According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. [. . . ] Reset all saved information relating to Samsung accounts and linked service accounts, as well as Smart Hub service agreements and applications. TV settings Reset Smart Hub Reset Web Browser 111 222 333 444 555 666 777 888 999 1111 1111 1111 1111 1111 1111 1111 1111 Select Web Browser. The browsing screen may differ from the one on your computer. The web browser is not compatible with Java applications. If you attempt to download a file, you will receive an error message instead. [. . . ]