User manual SAMSUNG UN22D5003

[. . . ] Make sure that at least two persons lift and move the LED TV. Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side. Audio Cable (Not Supplied) Device AUDIO OUT Video Cable (Not Supplied) UN19C4000, UN22C4000, UN22C4010 1 Using your remote control, select 2 Select Home Use, and then the language for the On Screen Display (OSD), and then press the ENTERE button. Plug & Play Select Language of the OSD. Menu Language : English Español Français U Move E Enter Plug & Play Anrenna Source Digital Cable System Analog Cable System : : : Air Cable Auto Audio Cable (Not Supplied) Component Cable (Not Supplied) Video Cable (Not Supplied) Good Connection Component connection (up to 1080p) Using a Component Cable DVD / Blu-ray player / Cable Box / Satellite receiver / VCR DVD / Blu-ray player COMPONENT OUT AUDIO OUT Lowest Quality Connection Audio/Video connection (480i only) Using an Audio/Video Cable DVD / Blu-ray player / Cable Box / Satellite receiver / VCR Device AUDIO OUT VIDEO OUT 1 Insert the stand body into the stand base. press the ENTERE button. [. . . ] After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box. Using a HDMI to DVI Cable DVI OUT UN22D5003 Top view 4 The TV memorizes the available channels. This process can take up to 45 minutes. Screws (M4 X L12) AUDIO OUT Digital Audio connection Using an Optical Cable Digital Audio System Optical Cable (Not Supplied) Audio Cable (Not Supplied) 5 After the TV has memorized the channels, choose the Clock Mode. Select If you select Manual, the clock setting screen appears. 1 Connect the Guide Stand to the Stand using four screws (M4 X L12) as shown Guide Stand Stand Auto if you have a digital channel in your area. Select Manual if you don't, or if you have a cable or satellite box. When done, press the ENTERE button. OPTICAL s s s s s Using a D-Sub Cable Audio Cable (Not Supplied) 6 Select the daylight savings time setting: Off or On, and then press the ENTERE button. AUDIO OUT Analog Audio connection Using an Audio Cable D-Sub Cable (Not Supplied) 2 With your TV upright, connect the TV to the Stand as shown. 3 Fasten three screws (M4 X L8) at s s Rear position 1, and then fasten three screws (M4 X L8) at position 2. 7 Select the time zone in which you live, and then press the ENTERE button. 8 After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section. PC OUT Amplifier / DVD home theater Audio Cable (Not Supplied) AUDIO IN Using an EX-Link Cable Connection Digital Audio connection Using an Optical Cable Digital Audio System Optical Cable (Not Supplied) s s 2 Available Devices: External devices that support EX-Link. EX-LINK: Connector for service only. s s s s s s Front 1 9 The Enjoy your TV. Then press the ENTERE button. If You Want to Rerun Plug & Play 1. Press the SOURCE button on your remote, then select TV mode. On the Picture mode menu, use the or on your remote to select the Picture Mode you want. Press the EXIT button to exit the menu. TOOLS INFO MEDIA. P TOOLS FAV. CH INFO Displays Favorite Channel Lists on the screen. Selects the on-screen menu items and changes the values seen on the menu. Press the or button on your remote to select a menu option, and then press the ENTERE button. When done using the menu, press the EXIT button on your remote to exit. S. MODE A B SLEEPC EXIT B C EXIT D Returns to the previous menu. Buttons used in the Channel list, Media Play menu, etc. RETURN A B C EXIT D MTS D CC MTS CC Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV, press the MENU button on your remote, then select Setup Time. Select Clock Mode, and then press the ENTERE button. Choose Auto or Manual. Changing the Screen Size S. MODE: Press to select the sound mode. SLEEP: Automatically shuts off the TV at a preset time. [. . . ] CC: Controls the caption decoder. P. MODE S. MODE P. MODE P. SIZE SLEEP P. SIZE S. MODE P. MODE Use these buttons in Media Play and Anynet+ modes. (: Controls recording for Samsung recorders that have the Anynet+ feature) SLEEP P. SIZE MTS CC Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. To change the screen size, press the P. SIZE button on your remote. [. . . ]