User manual SAMSUNG UN32F5500AF

[. . . ] To receive more complete service, please register your product at www. samsung. com/register Model _____________ Serial No. _____________ 2010 Samsung Electronics Co. , Ltd. All rights reserved. BN68-02625A-01 Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Important Warranty Information Regarding Television Format Viewing See the warranty card for more information on warranty terms. [. . . ] How to set up automatically To set up the wireless connection automatically, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" procedure. Press the button to select Internet Protocol Setup, and then press the ENTERE button. Press the or button to select Auto, and then press the ENTERE button. Press the button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks. In the list of networks, press the or button to select a network, and then press the ENTERE button. Network Setup Select a network Internet Protocol Setup IP Address Subnet Mask Gateway DNS DNS Server : Not Selected : Auto : : : : Auto : PBC(WPS) U Move E Enter R Return If the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection. 5. If the Security/PIN pop-up appears, go to Step 5. If the Network Connecting Screen appears, go to Step 9. Press the or button to select Security or PIN. You can also use the other arrow buttons to move up, down, and back. Enter the IP Address, Subnet Mask, and Gateway values. Press the button to go to the first DNS entry field. When done, press the button to go to Select a Network. Select your network, and then press the ENTERE button. Go to Step 4 in the "How to set up automatically" (p. 28), and follow the directions from that point on. If Your TV Fails to Connect to the Internet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect. To resolve this problem, ask your ISP about the procedures required to connect devices other than a PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet, your TV may not be able to connect to the Internet. If this is the case, you must enter your ID or password when connecting to the Internet. [. . . ] Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90 degree connectors. This is part of the product's design and is not a defect. [. . . ]