User manual SAMSUNG UN75F7100AF

[. . . ] This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that important literature concerning operation and maintenance has been included with this product. € The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. [. . . ] Otherwise, when you play video over a network connection, the video may not play smoothly. €• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network. €• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure. €• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network. Network Security Protocols The TV only supports the following wireless network security protocols: •• Authentication Modes: WEP, WPAPSK, WPA2PSK •• Encryption Types: WEP, TKIP, AES In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802. If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings. €• Operating range Recommended pairing distance 50cm 2~6m Recommended viewing distance Recommended viewing distance 2~6m (6. 5 ft) Recommended pairing distance 50 cm or less (19. 5 in) ✎✎ Once the 3D glasses are paired, the remaining battery capacity is displayed on the TV screen. However, the battery level will recover to a certain degree in about a minute. The glasses and the TV and the strength of the Bluetooth signal. Feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013. ) ✎✎ If you keep trying to pair the glasses and the TV after pairing has failed, the battery level will decrease ✎✎ The working distance is affected by the presence of obstacles (a person, metal, walls, etc. ) between ✎✎ Turn off the 3D glasses when they are not in use. If you leave the 3D glasses on, the battery lifespan Pairing steps 1. Turn on the TV, and then move the glasses within 19. Press the power button on the 3D glasses briefly. [. . . ] To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty. [. . . ]