User manual SAMSUNG UW-28J10VD

[. . . ] 3WAY COMBINATION TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS VCR / DVD / VCD / CD / MP3 PLAYER TELETEXT FUNCTION (depending on the model) Safety Instructions ENG Do not expose the television to extreme temperature conditions or to extreme humidity conditions. Do not expose the television to direct sunlight and other sources of heat. Do not expose the television to any liquids. Never put objects of any kind into the television, and do not place a water-containing vessel on the television. [. . . ] PLAY/PAUSE ( ). REC ( ). STOP (). If the VCR is left in Pause mode for more than ten minutes, recording will be stopped automatically to protect the heads and the cassette. If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. If you reach the end of the tape while recording, the cassette rewinds automatically. 45 Recording a Programme with Automatic Stop ENG This function enables you to record up to four hours of programmes. The VCR unit stops automatically after the requested length of time. 1 Select the channel number to be recorded using the P or button or the AV source using the INPUT button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television. 2 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: ) button for at least two seconds to start 3 The record indicator appears on the screen. During recording you can also press the INFO button to display the recording time remaining. 4 Press the REC ( ) button several times to increase the recording time. (30 1:00 1:30 2:00 3:00 4:00) Result: The length of time is displayed. The selected programme is recorded for the length of time requested. At the end of that time, the VCR unit stops recording automatically. 5 If you wish to cancel the recording before the end, press the REC ( ) button several times until 0:00 is displayed or press the STOP () button. Result: The VCR unit stops recording after six seconds. If the end of the tape is reached while recording, the recording stops. 46 Using the Before presetting your VCR unit: Feature (depending on the model) ENG Check that the language, date and time are correct (if the clock has not been set, the Date/Time Setting function is activated automatically) Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. 1 Press the SHOW VIEW button. A message is displayed to allow you to enter the Result: SHOWVIEW code. SHOWVIEW CODE 0-9 Code --------Correct End If there is no SHOW VIEW button on your remote control, the SHOWVIEW feature is not available on your model. If all six programmes have been set, the list of preset recordings is displayed to enable you to modify an existing recording or clear one that you no longer require. Refer to page 51 for further details. VCR Menu PR. Start Stop Date Mode Decoder Speed PDC P1 22 : 00 23 : 00 30 / 04 / 2003 Once Off SP Off 2 Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. 3 4 If you wish to correct the SHOWVIEW code that you are entering: Press the oe button until the digit to be corrected is cleared Enter the correct digit Select Adjust Exit VCR Menu PR. Start Stop Date Mode Decoder Speed PDC P1 22 : 00 23 : 00 30 / 04 / 2003 Once Off SP Off Press the MENU button. Result: Press the oe or button again. When you finish the inputting SHOWVIEW code, the Timer Record program will be set automatically. At this moment, the current channel is set for the recording. When using the SHOWVIEW function, you can change the programme number with the or . . . buttons. Select Adjust Exit VCR Menu PR. Start Stop Date Mode Decoder Speed PDC P1 22 : 00 23 : 00 30 / 04 / 2003 Once Off SP Off 5 Press the or . . . button to select Start, and tnen press the oe or button. Modify the start time by pressing the or . . . button. 6 When entering the date and time, all single digits must be preceded by a zero. [. . . ] 2) The DVD's software doesn't support the feature (e. g. , angles). 3) The feature is not available at the moment. 4) You've requested a title or chapter number or search time that is out of range. Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function. [. . . ]