User manual SAMSUNG VAC9073RP

[. . . ] ⷠBecause these following operating instructions cover various models, the characteristics of your WARNING vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED WARNING Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists. CAUTION OTHER SYMBOLS USED Indicates that a risk of personal injury or material damage exists. [. . . ] keep it indoors (0°C~40°C). Before you discard product, dispose of batteries in an environmentally safe manner. Do not discard this batteries with your regular household trash. Follow all local regulations when disposing of old batteries. If the battery is out of order, do not disassemble it. Contact your nearest customer care center. An increased charging time and a shorter battery life indicates the near end of the battery life. Please contact an authorized customer care center to replace your battery. The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. Operating _23 Setting the Time The clock displays the current time. When the vacuum cleaning robot is operating, press the ( button to cancel the operation and select a function. ) 03 OPERATING Turning the power on or off Turning the power on Main unit: Press the ( ) button. Turning the power off - Remote control: Press the [Power] button. Main unit: Press and hold the ( ) button down for 3 seconds. If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging. To turn the power on again, press and hold the power (Start/Stop) button on the main body. Using the remote control Starting or stopping cleaning Starting - Remote control : Press the Auto, Spot, Max, Manual button. Main unit : Select Auto, Spot, Max mode by using the ( and then pressing the ( ) button. ) button When cleaning begins, the vacuum cleaning robot starts to move. ) button without selecting cleaning mode starts Pressing the ( to perform the Auto mode cleaning. Stopping To stop, press the ( ) remote control or main unit button. [. . . ] Turn off the Power Switch at the bottom and move the vacuum cleaning robot to a different location. ⷠTurn off the Power Switch at the bottom and remove the foreign substance from the power brush. ⷠTurn off the Power Switch at the bottom and remove the foreign substance from the left driving wheel. ⷠTurn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel. [. . . ]