User manual SAMSUNG VC-5914

[. . . ] WARNING: Do not use the vacuum cleaner when rug or floor is wet. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] Only the manufacturer or qualified service personnel can replace power cords. Serious injury may result. WARNING 1. The hose should be checked regularly and must not be used if damaged. 1 IDENTIFICATIONS OF PARTS HANDLE AIR REGULATOR SUCTION HOSE TUBE* DUST-FULL INDICATOR POWER CONTROL SWITCH* & ON/OFF SWITCH CARRYING HANDLE& CORD REWIND BUTTON BUTTON FOR SUCTION HOSE REMOVAL CLAMPER FOR DUST BAG COMPARTMENT FLOOR NOZZLE* RUG/FLOOR SELECTOR *BELT-STRAP ASSY CREVICE-TOOL DUSTING BRUSH Features marked * may vary according to model. 2 ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depending on model). 3) Connect the nozzle to the suction tube. OPTION : EXTENDING : Holding the narrow part of the telescopic tube with one hand, pull the handle in the opposite direction with your other hand. SHORTENING : Holding the narrow part of the telescopic tube with one hand, push the handle towards it using the other hand. - Adjustable telescopic tube not available with all models. 4) Grip the body connector with one hand and squeeze the tube in an inward direction. POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord. NOTE : For your convenience, the handle has two functions. It can be used as a "handle" to carry the unit. It is also the cord rewind button that can be used to rewind the power cord. 3 ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. POWER CONTROL(VARIABLE CONTROL TYPE ONLY) The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e. g. net curtains. MAX = For hard floors and heavily soiled carpets. [. . . ] FOR UNIVERSAL BRUSH Use the floor nozzle for cleaning all surfaces. NOTE: For optimum efficiency, clean floor brush with crevice tool. TROUBLE SHOOTING PROBLEM Motor does not start. Filter, nozzle, suction hose or tube is blocked. [. . . ]