User manual SAMSUNG VC-6014

[. . . ] DJ68-00097R 8/16/01 12:32 PM Page 1 Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. DJ68-00097R 8/16/01 12:32 PM Page 2 IMPORTANT SAFEGUARDS This appliance must be connected to the same main voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. [. . . ] 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord. ON / OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch with your toe. POWER CONTROL(VARIABLE CONTROL TYPE ONLY ) The vacuuming power can be adjusted to suit any situation with the electrical power control. M I N = For delicate fabrics, e. g. net curtains. MAX = For hard floors and heavily soiled carpets. 3 DJ68-00097R 8/16/01 12:32 PM Page 5 DUST-FULL INDICATOR If the "Dust-Full" indicator changes to "RED" while you are cleaning, the dust bag requires replacement. NOTE : If the "Dust-Full" indicator continues to display "RED" even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. CREVICE USING THE ACCESSORIES DUSTING · Crevice tool for radiators, crevice, corners, between cushions. · Dusting brush for furniture, shelves, books, etc. · Before use, assemble the dusting brush to the crevice tool. TOOL STORAGE Your cleaner features a tool storage device. Assemble the accessory hanger on to the extension tube. It can be used to store the cleaning tools while they are not in use. This tool can be separated into two parts. USING THE BLOWER Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. 4 DJ68-00097R 8/16/01 12:32 PM Page 6 PARK POSITION Located in the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. TRANSPORTING AND STORING THE VACUUM CLEANER For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. REPLACING THE DUST BAG 1) To open the dust cover of the dust bagcompartment, press the clamper upward. [. . . ] Check that the cord is not Pull the cord out 2~3m & twisted or wound unevenly. push down the cord rewind button. DJ68-00097R REV (0. 0) 7 [. . . ]