User manual SAMSUNG VC-6016V

[. . . ] DJ68-00186G (0. 0) 3/21/03 11:41 AM Page 1 Operating Instructions VC-6000 SERIES VACUUM CLEANER Before operating this unit, please read the instructions carefully. DJ68-00186G (0. 0) 3/21/03 11:41 AM Page 2 IMPORTANT SAFEGUARDS v v v v v v v v v v v This appliance must be connected to the same main voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. [. . . ] M I N = For delicate fabrics, e. g. net curtains. MAX = For hard floors and heavily soiled carpets. 3 DJ68-00186G (0. 0) 3/21/03 11:41 AM Page 5 DUST-FULL INDICATOR If the "Dust-Full" indicator changes to "RED" while you are cleaning, the dust bag requires replacement. NOTE : If the "Dust-Full" indicator continues to display "RED" even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. CREVICE USING THE ACCESSORIES DUSTING · Crevice tool for radiators, crevice, corners, between cushions. · Dusting brush for furniture, shelves, books, etc. · Before use, assemble the dusting brush to the crevice tool. TOOL STORAGE Your cleaner features a tool storage device. Assemble the accessory hanger on to the extension tube. It can be used to store the cleaning tools while they are not in use. This tool can be separated into two parts. USING THE BLOWER Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. 4 DJ68-00186G (0. 0) 3/21/03 11:41 AM Page 6 REPLACING THE DUST BAG 1) To open the dust cover of the dust bagcompartment, press the clamper upward. (The clamper is located at the front of the dust cover) 2) Remove the carrying bag from the cleaner. 3) After removing the used dust bag, insert the cardboard bag collar of the new dust bag into the carrying bag. 4) Press the dust cover down gently until the clamper relocks. NOTE : Used dust bag can be sealed by removing the film from the paper and sticking the latter over the suction opening. (ONLY PAPER BAG) FOR CLOTH FILTER BAG After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. 5 DJ68-00186G (0. 0) 3/21/03 11:41 AM Page 7 MAINTENANCE OR REPLACEMENT OF THE FILTERS 1) INLET-FILTER. · Open the dust cover. · After detaching the filter, wash it lightly withwater, dry it in the shade, and then insert it in its original position. · Close the dust cover. 2) OUTLET-FILTER. · To open the filter cover, press front and pull it simultaneously. · Remove and replace the dirty microfilter. [. . . ] Check that the cord is not Pull the cord out 2~3m & twisted or wound unevenly. push down the cord rewind button. 7 DJ68-00186G REV (0. 0) [. . . ]