User manual SAMSUNG VC-6714H

[. . . ] Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the plug to disconnect from power outlet to avoid damage to cord, plug, prongs or socket. Always disconnect cord from electrical outlet before changing the dust bag. The use of an extension cord is not recommended. [. . . ] If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. Do not attempt to replace a damaged power supply cord. Only the manufacturer or qualified service personnel can replace power cords. Serious injury may result. Warning 1. This hose contains electrical connections 2. The hose should be checked regularly and must not be used if damaged. 1 IDENTIFICATIONS OF PARTS REMOTE POWER CONTROL (REMOTE CONTROL MODEL ONLY) SUCTION REGULATOR (ON / OFF CONTROL MODEL ONLY) EXTENSION TUBES HOSE CARRYING HANDLE DUST COVER FLOOR NOZZLE RUG/FLOOR SELECTOR HOSE CLAMP DUST INDICATOR CORD REWIND BUTTON ON/OFF SWITCH ACCESSORY HANGER CREVICE-TOOL 2 ASSEMBLING THE VACUUM-CLEANER SO THAT IT IS READY FOR USE z { *OPTION 1. Slide the free end of the extension wand into the nozzle tube. Slide the narrow end of one extension wand into the other extension wand. Slide the extension wand into the handle end of the hose. Serious injury may result. NOTE : NOTE:There are two types of dust bag according to the model. The other is a cloth filter bag type. CORD STORAGE To extend the power cord for use, grasp the plug and gently pull out from the vacuum cleaner. When removing the power cord from the electrical outlet, switch off the power and grasp the plug. Your cleaner is equipped with an automatic rewind button. After cleaning, switch off power and disconnect the plug from the electrical outlet then press on the cord rewind button with your hand. Press ON / OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly on the switch downward with your toe. PARK POSITION Located on the top rear side of the vacuum cleaner, there is a support for a convenient park position during pauses when using the nozzle. STANDS ON END Your cleaner is designed to stand firmly upright for cleaning or storage. Use in this manner and it takes up a minimum of space, and allows you to work in the narrowest spaces. 5 CARE OF FILTERS M SECONDARY FILTER To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may result. [. . . ] Do not allow the filter to become clogged. Suction power reduction or motor damage may result. After washing the secondary filter in warm water, dry it thoroughly, then attach it in place. SECONDARY FILTER CASE SECONDARY FILTER M MICRO FILTER 1) Lift the carrying handle. 2) Separate the exhaust filter. 3) Reassemble it after cleaning. NOTE :: The filters must be completely dried before being replaced in the dust NOTE compartment. TOOL STORAGE Your cleaner features an tool storage space. [. . . ]