User manual SAMSUNG VC-7424V

[. . . ] The wires may be disconnected or damaged. x Avoid using inflammable spray gases such as insecticides near this product. x Prevent children from inserting their fingers or objects into the air inlet and outlet. x Do not attempt to install or repair this product by yourself. [. . . ] x The air cleaner operates in the Sleep mode. You can change modes at any time. Note 3 To control the direction of the air flow, refer to page 17. To adjust the clean level, refer to page 15. To adjust the generating anions, refer to page 14. Note The brightness of the display during the Sleep Mode x In the Sleep Mode, the brightness of the display decreases so that it may not disturb your sleep. x If you wish to turn off the display completely, press the Dimmer button on the remote control. However, the Nano e-HEPA indicator cannot be turned off. E-12 Selecting the Odor Mode If you select the Odor Mode, the air cleaner can eliminate airborne contaminants and harmful smells effectively in the indoor air. In this operating mode, the air cleaner automatically adjusts the clean level according to the signal of the odor contamination level without the dusts and motes contamination level in the indoor air. Anions are generated automatically and the air flow blade moves automatically. 1 If necessary, press the Result: (Power) button. x The Power indicator on the display comes on. x The air cleaner runs in the Auto Mode. x The air cleaner makes a ringing sound. 2 If the the Result: is not displayed on the display, select the Odor mode by pressing button until it is displayed on the display. x The air cleaner runs in the Auto Mode. There are three brightness levels that you can choose from: - Press the button once: The display becomes dim. - Press the button twice: The display turns off. IMPORTANT The indicator is always lighted brightly. Note x By simply pressing the Dimmer button, you can check the level of contamination in the room with your eye. This can be done even though the air cleaner is not in operation. E-18 Adjusting the Clean Level (Fan Speed) The air cleaner automatically adjusts the clean level according to the contamination levels of the indoor air. It is also possible for you to manually select the clean levels. 1 If necessary, press the Result: (Power) button. x The Power indicator on the display comes on. x The air cleaner runs in the Auto Mode. x The air cleaner makes a ringing sound. 2 If you wish to manually select the clean level, press the one or more times until the desired clean level is selected. Result: button x The air cleaner beeps. x The air cleaner operates in the clean level that was selected. HH (Turbo) H M L (High) (Medium) (Low) 3 If you wish the air cleaner to automatically adjust the clean level for you, press the button on the remote control until the Auto mode is selected. [. . . ] This may prevent you from making an unnecessary call and wasting your time and money. Problem The air cleaner does not operate. x x x x Explanation/Solution Check for a power failure. Check that the power plug is plugged in tightly. [. . . ]