User manual SAMSUNG VC-7716VN

[. . . ] © 2003 Samsung Electronics Co. , Ltd. All rights reserved. · SCX-5315F, VC-7716VN and Samsung logo are trademarks of Samsung Electronics Co. , Ltd. · Centronics is a trademark of Centronics Data Computer Corporation. · IBM and IBM PC are trademarks of International Business Machines Corporation. [. . . ] The current setting blinks. 2 Use or to select the paper size you are using, and press Mode/Enter (Enter for VC-7716VN) to save the selection. You can press the corresponding number shown on the display to select the paper size. 3 To return to Standby mode, press Stop/Clear. To set the paper size for the Multi-Purpose Tray, take the following steps: 1 Press Menu/Exit and then System Data from the onetouch dial keypad. VC-7716VN users should press Menu and then Enter. The display shows "CASSETTE PAPER" on the top line and the available options on the bottom line. 2 Use to display "BYPASS TRAY" on the top line. The available options appear on the bottom line and the current setting blinks. 3 Use or to select the paper size you are using, and press Mode/Enter (Enter for VC-7716VN) to save it. You can press the corresponding number shown on the display to select the paper size. 4 To return to Standby mode, press Stop/Clear. PAPER HANDLING 3. 9 NOTE 3. 10 PAPER HANDLING 4 COPYING This chapter provides step-by-step instructions for copying documents. This chapter includes: · Loading Paper for Copy Output · Selecting a Paper Tray · Making Copies from the Automatic Document Feeder · Making Copies using the Document Glass · Setting Copy Options · Auto Fit Copying · Clone Copying · Duplex Copying · Collation Copying Loading Paper for Copy Output You can copy to a size of media as small as an index card 98 x 148 mm (3. 9 x 5. 8 in. ) or as large as a sheet of legal-sized 216 x 356 mm (8. 5 x 14 in. ) paper. The instructions for loading the print media are the same whether you are printing, faxing, or copying. For details, see page 1. 17 and page 3. 6. Selecting a Paper Tray After loading the print media for use when copying, you have to select the paper tray you will use for both copy and fax jobs (SCX-5315F only). 1 Press Paper Tray. The current setting appears on the bottom line of the display. 2 Select "CASSETTE" or "BYPASS" by pressing Paper Tray repeatedly or using the navigation buttons, and press Mode/Enter (Enter on VC-7716VN) to save the selection. 3 If you selected "BYPASS" at the step 2, the display prompts you to select the PAPER TYPE for the Multi-Purpose Tray. Use the navigation buttons to select the paper type you are using in the Multi-Purpose Tray. 4 Press Mode/Enter (Enter on VC-7716VN) to save the selection. 4. 2 COPYING Making Copies from the Automatic Document Feeder Using the ADF (Automatic Document Feeder), you can load up to 30 documents (20lb, 75 g/m2) in one job. You can choose from: TEXT: Used for documents containing mostly text. MIXED: Used for documents with mixed text and graphics. PHOTO: Used when the originals are photographs. 3 Press Mode/Enter (Enter on VC-7716VN) to save the selection. 4. 6 COPYING Contrast If you have an original document containing faint markings or dark images, you can adjust the brightness to make a copy that is easier to read. To adjust the contrast, take the following steps: 1 Press Contrast. 2 Press Contrast or the navigation buttons to select an option and press Mode/Enter (Enter on VC-7716VN). MANUAL: You can adjust the contrast manually. AUTO SUPPRESS: Use this setting for copying an original from a newspaper or magazine to remove its background image. This setting is available only in the Copy mode. 3 When you select Manual, choose from 5 contrast settings using the navigation buttons. Each time you press the button, the selection block on the LCD display moves to the left or to the right. As the selection block moves to the right, the contrast becomes darker. Selection block 4 4 Press Mode/Enter (Enter on VC-7716VN) to save the selection. Set Using the Set ( ) button, you can select the number of copies, from 1 to 999. 1 Press Set ( ). The triangle symbol on the middle of the top line heads for the number of copies. 2 Enter the number of copies using the number keypad. [. . . ] Press or to select the frame type you want to set and press Mode/Enter (Enter for VC-7716VN). If you don't want to enable the Netware protocol, select "OFF". 8 To return to Standby mode, press Stop/Clear. A. 10 INSTALLING A NETWORK OPTION Restoring the Network Configuration You can return the network configuration to its default settings. 1 Press Menu/Exit and then System Setup on the onetouch dial keypad. VC-7716VN users should press Menu and then Enter. 2 3 4 5 Press Press or or to display "NETWORK SETUP" on the top line. to display "SET DEFAULT" on the bottom line. Press Mode/Enter (Enter for VC-7716VN) to access the menu. [. . . ]