User manual SAMSUNG VC-8510

[. . . ] · Samsung and Samsung logo are trademarks of Samsung Electronics Co. , Ltd. · Microsoft, Windows, Windows XP and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation. · UFST® and MicroTypeTM are registered trademarks of Monotype Imaging Inc. · TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc. [. . . ] · In high humidity areas, do not leave paper in the machine for extended periods of time. · Fan the stack of paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. · Ensure that the paper is the proper paper weight. · Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared. · Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other documents that use more toner. · The machine may be turned on and off frequently. · The scanner lid may be left open while copies are being made. Character Voids Copy image is skewed. Horizontal stripes Blank copies print out. Image rubs off the copy easily. Frequent copy paper jams occur. Curl If the printed paper is curled or paper does not feed into the machine: · Turn the stack of paper over in the tray. Close all other applications, reboot Windows and try printing again. These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. The unit scans very slowly. Note Refer to Microsoft Windows 2000/XP/2003/Vista User's Guide that came with your PC for further information on Windows error messages. Message appears on your computer screen: · "Device can't be set to the H/W mode you want. " · "Port is being used by another program. " · "Port is Disabled. " · "Scanner is busy receiving or printing data. When the current job is completed, try again. " · "Invalid handle. " · "Scanning has failed. " 9. 13 <Troubleshooting> Common Linux problems Problem The machine does not print. Possible cause and solutions · Check if the printer driver is installed in your system. Open Unified Driver configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. · Check if the printer has started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. [. . . ] You can print multiple pages on one sheet of paper. Select Layout from the Presets drop-down list to access the following features. 1 2 3 Open a Macintosh application and select the file you want to print. Open the File menu and click Page Setup (Document Setup in some applications). Choose your paper size, orientation, scaling, and other options and click OK. Make sure that your printer is selected. [. . . ]