User manual SAMSUNG VC-8828E

[. . . ] Close supervision is necessary when any appliance is used by or near children. Do not allow the vacuum cleaner to be used as a toy. [. . . ] Do not attempt to replace a damaged power supply cord. Only the manufacturer or qualified service personnel can replace power cords. Serious injury may result. WARNING 1. The hose should be checked regularly and must not be used if damaged. 1 DJ68-00104A 10/18/01 11:53 AM Page 3 IDENTIFICATIONS OF PARTS HOSE * REMOTE POWER CONTROL * (REMOTE CONTROL TYPE ONLY) HANDLE * SUCTION REGULATOR * AUTO BUTTON * TUBE * TRANSPARENT TUBE * POWER CONTROL SWITCH * CORD REWIND BUTTON ON/OFF BUTTON FLOOR NOZZLE * TOOL STORAGE COVER BUTTON FOR SUCTION HOSE REMOVAL DUST COVER CLAMPER FOR DUST BAG COMPARTMENT CARRYING HANDLE Features marked with * may vary according to model. 2 DJ68-00104A 10/18/01 11:53 AM Page 4 ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Adjust the suction tube(depending on model). EXTENDING : Holding the narrow part of the telescopic tube with one hand, push the handle in the opposite direction with your other hand. SHORTENING : Holding the narrow part of the telescopic tube with one hand, pull the handle towards it using the other hand. OPTION : Connect the suction tubes together. NOTE : Adjustable telescopic tube is not available with all models. 3) Connect the nozzle to the suction tube. 4) Connect the body connector to the body of the cleaner. 3 DJ68-00104A 10/18/01 11:53 AM Page 5 POWER CORD 1) PULLING OUT : The power cord is long enough to drawn out for convenience. 2) REWINDING : When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord. ON/OFF SWITCH You can start or stop your vacuum cleaner by pressing the on/off switch lightly with your toe. POWER CONTROL(VARIABLE CONTROL TYPE ONLY) The vacuuming power can be adjusted to suit any situation with electrical power control. ECO = Economy setting for normally soiled carpets. MAX = For hard floors and heavily soiled carpets. 1) For slider control types Slide the controller to upwards or downwards to adjust the power output. Model with controller on the body of cleaner 2) For button control types Press (+)button to heighten the power. Press (-)button to lower the power. Model with controller on the handle Model with controller on the body of cleaner Model with controller on the handle 4 DJ68-00104A 10/18/01 11:53 AM Page 6 AUTO MODE (BUTTON CONTROL TYPE ONLY) If you press AUTO MODE, the power is automatically set at 1200~1300 watt. This mode reduces the suction power fluctuation which is caused by the fluctuation of airflow quantity to the motor. [. . . ] Select flat surface indicator when cleaning the floors, tiles, etc. FOR UNIVERSAL BRUSH Use the floor nozzle for cleaning all surfaces. NOTE: For optimum efficiency, clean floor brush with crevice tool. 9 DJ68-00104A 10/18/01 11:53 AM Page 11 TROUBLE SHOOTING PROBLEM Motor does not start. Filter, nozzle, suction hose or tube is blocked. [. . . ]