User manual SAMSUNG VC-9830

[. . . ] Operating Instructions VACUUM CLEANER Before operating Indoor use only. this unit, please read the instructions carefully. IMPORTANT SAFEGUARDS 1. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. [. . . ] The plug must be removed from the socket outlet before cleaning or maintaining the appliance. The use of an extension cord is not recommended. If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. 1 ASSEMBLING THE CLEANER 2 OPERATING THE CLEANER 2-1 POWER CORD 2-2 ON/OFF SWITCH (BODY-CONTROL TYPE ONLY) NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. 2-3 POWER CONTROL OPTION 1)BODY-CONTROL TYPE MIN = For delicate surface e. g. MAX = For hard floors and heavily soiled carpets. 2)REMOTE-CONTROL TYPE Features may vary according to model. Press control button repeatedly to select correct mode. (STOP MIN MID MAX) INFRARED-CONTROL NOTE If the cleaner is not working by handle-control you can operate the vacuum cleaner with the CONTROL-BUTTON on the body. For storage, park the floor nozzle. 2-4 USING FLOOR TOOLS 3 LAMP SIGNALS 1)BODY-CONTROL TYPE Check the Dust bag and change it. (Check the Dust bin and empty it. ) 2)REMOTE-CONTROL TYPE Check the Dust bag and change it. (Check the Dust bin and empty it. ) INDICATOR LAMP INDICATOR LAMP POWER LAMP * LAMP SIGNALS 1. INDICATOR LAMP ON: The dust bag is full, or the pipe is blocked. 2. POWER LAMP ON: The power is applied to the vacuum cleaner HARD FLOOR (OPTION) CREVICE 4 CHANGING THE DUST BAG 1 2 3 4 5 DUSTING PARQUET SPECIALIST (OPTION) NOTE A used dust bag can be sealed by removing the paper from the adhesive strip and sealing the strip over the hole. UPHOLSTERY POWER PET (OPTION) - TRANSPARENT TUBE OPTIONAL FOR CLOTH BAG After using, if the cloth bag is full of dust, clean the cloth bag and use it again. NOTE Please make sure to retain the support-filter when you dispose of the dust bag. 5 CLEANING THE CYCLONE FILTER (Optional) 1 2 3 4 5 6 4 5 6 7 OPTIONAL You can rinse the bin with water. [. . . ] Never heat up the batteries or throw them into fire. 3. Dispose the batteries properly. 81CLEANING THE INLET FILTER 2 3 4 Vacuum cleaner does not pick up dirt. NOTE : Don't throw away the filter [. . . ]