User manual SAMSUNG VC-9920

[. . . ] Do not allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run unattended at any time. Use the vacuum cleaner only for its intended use as described in these instructions. Do not use the vacuum cleaner without a dust bin. [. . . ] · Remove waste matter completely if the inlet is blocked. 2-Step Brush (Option) Carpet Cleaning Floor Cleaning · Adjust the inlet lever according to the floor surface. · Remove waste matter completely if the inlet is blocked. Parquet Master Brush (Option) · Vacuum dust in wide area at once. · Remove waste matter completely if the inlet is blocked. maintain tools and filter _9 maintain tools and filter Parquet Brush (Option) · Vacuum dust in wide area at once. · Remove waste matter completely if the inlet is blocked. Blanket Brush(Option) 1 2 Turbine 3 For picking up pet hair and fibre on upholstery and bed linen. Brush 1. Remove waste matter completely when inlet is blocked. Turn the lock button to ( ), and remove. To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ( ) position. CAUTION Use for bedclothes only. Be cautious not to damage brush during unclogging. Super turbine brush (Option) 1 2 3 For improved pickup of pet hair and fibre on carpets. 4 5 6 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. Turn the lock button to unlock position use the like coin( ). Remove waste matter such as dust and hair tangled around the brushbar using scissors. Remove dust inside the brush housing using a dry duster or crevice tool. Turn the lock button to lock position use the like coin( ). CAUTION Please be careful not to damage the brush. 10_ maintain tools and filter maintain tools and filter Power Pet Plus Brush (Option) 1 2 3 03 MAINTAIN TOOlS AND FIlTER 4 For improved pickup of pet hair and fibre on carpets. 5 6 Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. Push the Open button of the transparent screen cover to separate the cover. Remove the brushbar from the transparent screen. Remove waste matter such as dust and hair tangled around the brushbar using scissors. Remove dust inside the brush housing using a dry duster or crevice tool. Insert brushbar into rotating belt and assemble. Click the transparent screen cover back into place to reassemble. EMPTYING ThE DUST bIN 1 2 3 Once dust reaches the dust full mark, empty the dust bin. 4 Take the dust bin out by pressing the button. 6 Throw the dust away in the bin. After emptying the dust bin, remove the obstacles like hair, fur on the cap of the dust bin. Before use, push the dust bin into the main body and press the cover dust of the vacuum cleaner until you hear the "click" sound. maintain tools and filter _11 maintain tools and filter - Empty into a plastic bag. [. . . ] )ON/OFF( « «/» . )ON/OFF( )+ -( . 2 )MODE( « » . _6 1 · . · 5_ 5 5 6 18 6 8 9 11 12 14 14 15 8 16 _4 . [. . . ]