User manual SAMSUNG VC-C6360

[. . . ] Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. · WARNING: Do not use the vacuum cleaner when rug or floor is wet. · Close supervision is necessary when any appliance is used by or near children. [. . . ] · Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. · Unplug the cleaner when not in use. Turn off the power switch before unplugging. safety information _ contents AssemblING The CleANeR 05 Assembling the Cleaner 05 06 08 14 OpeRATING The CleANeR 06 06 06 Power cord On/Off Switch Power control mAINTAIN TOOls ANd fIlTeR 08 09 11 12 12 13 13 Using accessory Maintain floor tools Dust full indicator Changing the dust bag Cleaning inlet filter Cleaning outlet filter Change the battery (optional) TROUbleshOOTING _ contents assembling the cleaner 01 ASSEMblING ThE clEANER OPTION · Features may vary according to model. Refer to 5, 6 page. · For storage, park the floor nozzle. CAUTION assembling the cleaner _ operating the cleaner POwER cORD · When removing the plug from the electrical outlet, grasp the plug, not the cord. ON/OFF SwITch POwER cONTROl Remote-control type - hOse 1. Vacuum cleaner ON/Off( ) Press the ON/OFF button to operate the vacuum cleaner. Vacuum cleaner (+, -) Press the (+) button to operate the vacuum to highsuction power. Press the (-) button to operate the vacuum to low suction power. (ON) mIN mId mAX handle control The cleaner is controlled by using infrared signals. Don't cover the handle sender when you use a handel control button. If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine. sender _ operating the cleaner - bOdY Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF ON OFF) 1 If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine. 02 OPERATING ThE clEANER OpTIONAl-digital signal 1 The filter light is illuminated when the dusk pack requires checking or emptying. The ON/OFF button operates the vacuum cleanner or stops it. The INFRARED light indicates the part that receives the infra-red signal from the handle control. operating the cleaner _ maintain tools and filter USING AccESSORY Accessory · Push the accessory on to the end of the hose handle · Pull out and turn the dusting brush for cleaning delicate areas. · To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. Pipe · Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. · To check for blockages, separate the telescopic pipe and adjust to shorten. [. . . ] When the vacuum cleaner dows not work, replace the batteries. If the problem persists, please contact our authorized dealer. Never disassemble or recharge the batteries. WARNING . [. . . ]